XR230 Motard MD36 Direct Ignition Reinforced Plug Cap (Red)

★TWR Original Reinforced Parts Series This system transmits the high voltage ignition current generated by the ignition coil directly to the plug and sparks it. ★Since there is no need for a plug cord, there is no electrical resistance from the ignition coil to the plug, so the loss of generated voltage is minimized, combustion efficiency is significantly improved, more powerful torque is obtained, and fuel efficiency is also very good. Become. ★In order to maximize performance, we pay due consideration to the materials we use, and use products from major domestic manufacturers for all component parts. The cable that connects the direct ignition to the bike is a heat-resistant oxygen-free copper cable (commonly known as OFC cable) that uses 99.95% or more high-purity copper that does not contain oxides to minimize resistance and distortion. Reduces transmission loss. In addition, to protect the OFC cable from the heat generated by the engine, we use an integrated heat-resistant corrugated tube (flame-retardant material) with no slits, and to prevent leaks, we have waterproofed the inside of both ends with heat-resistant silicone material. , to ensure the durability of the entire system. *Reference resistance value of genuine plug cap Primary side resistance value: 0.1 to 0.3Ω ・Secondary side resistance value: 7.2 to 11kΩ ★ Resistance value of direct ignition reinforced plug cap Primary side resistance value: 0.07 to 0.1Ω ・Secondary side resistance Value: 4.6 to 6.8kΩ ◎ Improved combustion efficiency minimizes the adhesion of non-combustible substances to the piston head, and if you look at the comparison of combustion conditions using the same plug [left: genuine, right: reinforced parts], you can see the combustion efficiency. I think you can see the effect.

With this system, the high-voltage ignition current generated by the integrated ignition coil is transmitted straight to the plug and sparked. In order to solve problems such as difficulty in responding to rotation, poor contact due to leaks, generation of radio noise due to sparks, etc., we installed it on the XR250 (MD30 model: RFVC engine) and provided feedback on the results and techniques obtained from actual measurements, and further shared with general owners. We have conducted monitoring tests to provide a strengthened direct ignition system that can always provide proper and stable ignition performance and even higher combustion efficiency even with genuine standard specified spark plugs. ★Currently, it is one of the few standard customizations that can easily strengthen the ignition, and has been adopted by many owners of MD33 (E) engine equipped vehicles [FTR223, CB223S, SL230] and motorcycle shops. This is a long-selling part for ignition and combustion system tuning that has been well received. ★The set includes 1 set of direct reinforcement plug caps, 2 tie wraps for installation, and an instruction manual [effective methods for using genuine plugs are also included] Caution (Disclaimer) > Please be sure to read this when considering this product Please check the engine condition of your car in advance and use your own judgment and at your own risk. After understanding the above, we look forward to serving you.


Manufacturer: ‎TWR PRODUCTS
Brand: ‎TWR
Manufacturer Reference: ‎XR230-DKPC-OR