TAMIYA 1/10 Electric RC Car Series No.519 Toyota Hilux 4WD High Lift (RN36) 58519

This is an electric radio control car assembly kit that reproduces the Toyota Hilux (RN36), a four-wheel drive pickup truck that gained a lot of support in the 1980s, mainly in the United States, but also in Japan, and is still very popular today.Similar to the actual vehicle. The ladder frame is equipped with an assembled 3-speed transmission with a 540 motor specification, allowing you to enjoy light gear changes while driving with RC operation.The suspension uses a metal axle housing that is positioned using a leaf spring and oil damper, and a radius rod at the rear. Rigid type equipped with a metal underguard on the front to support tough driving [Basic specifications] ●Overall length 525mm, overall width 278mm, overall height 244mm, vehicle weight approximately 3.2kg. ●Tread = front 200mm, Rear 218mm ●Wheelbase=287mm ●Tire width/diameter=60/123mm front and rear ●Motor=RS540 type ●Drive system=Vertical motor shaft drive 4WD ●Differential gear system F/R both=6 pinion gear differential ●Damper=oil both front and rear Damper ●Gear ratio = Low 1:54.63 (4WD) Second 1:40.49 (2WD) Top 1:27.92 (2WD) ●Controller = ESC specification (sold separately) *[What must be purchased separately] Fine spec 2.4G 4 channel radio (transmission) machine/receiver set), two servos and an ESC are required. 4 AA batteries for transmitter

This is an electric radio control car assembly kit that reproduces the Toyota Hilux (RN36), a four-wheel drive pickup truck that gained a lot of support in the 1980s, mainly in the United States, but also in Japan, and is still very popular today. Equipped with an assembled 3-speed transmission using a 540 motor on a ladder frame similar to the actual vehicle, you can enjoy light gear changes while driving with RC operation. The suspension is a rigid type with a metal axle housing, leaf springs, and a radius rod at the rear. The front is also equipped with a metal under guard to support tough riding. In addition, the realistic construction uses many metal parts such as the ladder frame, leaf springs, axle housing, and wheel hubs, making it a lot of fun to assemble. The body equipped with a sleeper cab is made of styrene resin using a precision mold to give it a scale feel. Equipped with large tires with a diameter of 123mm, the vehicle height is greatly increased, making it attractive. Separate RC equipment and batteries are required. *This product does not include the transmitter, transmitter battery, RC mechanism (receiver, ESC, servo, etc.), driving battery, battery charger, etc. Additional parts purchase, assembly, and painting are required before driving.