1
/
of
4
Auto Parts Tokyo
Speed Display Meter Suzuki Bandit GSF600 GSF650 GSF1200 GSF1250 GSF 600 650 1200 1250 Motorcycle Gear Indicator 1-6 Level Digital Gear Meter
Speed Display Meter Suzuki Bandit GSF600 GSF650 GSF1200 GSF1250 GSF 600 650 1200 1250 Motorcycle Gear Indicator 1-6 Level Digital Gear Meter
Regular price
$170.00 USD
Regular price
Sale price
$170.00 USD
Unit price
/
per
Shipping calculated at checkout.
Condition: New
Couldn't load pickup availability
Application: Motorcycle Speed Gear Display Indicator Meter for Suzuki Bandit GSF600 GSF650 GSF1200 GSF1250 GSF 600 650 1200 1250. Function: This is a gear indicator display assembly that can accurately display the current gear number. Exterior: Motorcycle Speed Gear Indicator Bright and soft, the gear display is clearly visible and prevents gear errors from damaging your motorcycle. Instalación: Medidor de velocidad de la pantalla de la motocicleta el proceso de instalación es simple, práctico y fácil de usar. Con perfecta adaptabilidad, sólo tiene que sustituir y montar. Maquina antes de comprar.
Bienvenido a nuestra tienda y le deseamos una agradable experiencia de compra.somos fabricantes profesionales de piezas de motocicletas.Para cualquier pregunta o inquietud, no dude en ponerse en contacto con nuestro equipo de servicio al cliente. Features: Light Color: Red/Blue/Green 1-6 Levels IP68 Waterproof Gear Display Fitment: Suzuki GSF600 Bandit 2000-2004 Suzuki GSF650 Bandit 2005-2006 Suzuki GSF1200 Bandit 2001-2006 Locate the speed sensor connector. The speed sensor is typically mounted on the front sprocket cover, with a 3-pole black speed sensor coupler located 20-40 cm (8"-16") from the sensor. Lift the fuel tank and remove the seat or side fairing to access the connector. Verification: 1. Separate the speed sensor connector (you may need to use a small flat head screwdriver to separate the connector). With the ignition on, rotate the rear wheels. The speedometer should read 0. If so, turn off the ignition and proceed to the next step. Otherwise, if the speedometer registers a non-zero speed, you did not disconnect the correct coupler and should look again. 2. After separating the speed sensor connector, plug in both the male and female 3-pole Jefizz hip harness connectors. Make sure the connector is fully seated. 3. Locate the wire coming out of the signal generator (pickup coil/CKP sensor). If in doubt, check your bike's service manual or contact your dealer. 4. Connect the GFY black/green wire to this wire using the supplied red wire tap connector. Configuration: You need to setup the module after installation. When the ignition is turned on, the display will count backwards (from 6 to 1) to indicate that the memory has been cleared.
Manufacturer: MUTYNE
Part number: MUTYNE
Item weight: 150 g
Packing size: 3 x 2 x 1 cm; 150 g
Size: One Size
br>Color: Blue Light
Quantity: 1
Bienvenido a nuestra tienda y le deseamos una agradable experiencia de compra.somos fabricantes profesionales de piezas de motocicletas.Para cualquier pregunta o inquietud, no dude en ponerse en contacto con nuestro equipo de servicio al cliente. Features: Light Color: Red/Blue/Green 1-6 Levels IP68 Waterproof Gear Display Fitment: Suzuki GSF600 Bandit 2000-2004 Suzuki GSF650 Bandit 2005-2006 Suzuki GSF1200 Bandit 2001-2006 Locate the speed sensor connector. The speed sensor is typically mounted on the front sprocket cover, with a 3-pole black speed sensor coupler located 20-40 cm (8"-16") from the sensor. Lift the fuel tank and remove the seat or side fairing to access the connector. Verification: 1. Separate the speed sensor connector (you may need to use a small flat head screwdriver to separate the connector). With the ignition on, rotate the rear wheels. The speedometer should read 0. If so, turn off the ignition and proceed to the next step. Otherwise, if the speedometer registers a non-zero speed, you did not disconnect the correct coupler and should look again. 2. After separating the speed sensor connector, plug in both the male and female 3-pole Jefizz hip harness connectors. Make sure the connector is fully seated. 3. Locate the wire coming out of the signal generator (pickup coil/CKP sensor). If in doubt, check your bike's service manual or contact your dealer. 4. Connect the GFY black/green wire to this wire using the supplied red wire tap connector. Configuration: You need to setup the module after installation. When the ignition is turned on, the display will count backwards (from 6 to 1) to indicate that the memory has been cleared.
Manufacturer: MUTYNE
Part number: MUTYNE
Item weight: 150 g
Packing size: 3 x 2 x 1 cm; 150 g
Size: One Size
br>Color: Blue Light
Quantity: 1
Share
