1
/
of
4
Auto Parts Tokyo
Speed Display Meter Motorcycle Gear Indicator Digital Gear Meter Kawasaki Ninja ZX6R Non-ABS 1998 1999 2000 2001 2002 / Ninja ZX6R 1998-2002
Speed Display Meter Motorcycle Gear Indicator Digital Gear Meter Kawasaki Ninja ZX6R Non-ABS 1998 1999 2000 2001 2002 / Ninja ZX6R 1998-2002
Regular price
$177.00 USD
Regular price
Sale price
$177.00 USD
Unit price
/
per
Shipping calculated at checkout.
Condition: New
Couldn't load pickup availability
Application: Motorcycle Speed Gear Indicator for Kawasaki Ninja ZX6R NON ABS 1998 1999 2000 2001 2002 / Ninja ZX6R 1998-2002. Function: The motorcycle gear indicator shows the gear when the engine is running and the clutch is released. Exterior: The motorcycle gear indicator has a good display effect, small and beautiful design. Instalación: Medidor de velocidad de la pantalla de la motocicleta el proceso de instalación es simple, práctico y fácil de usar. Con perfecta adaptabilidad, sólo tiene que sustituir y montar. Maquina antes de comprar.
Bienvenido a nuestra tienda y le deseamos una agradable experiencia de compra.somos fabricantes profesionales de piezas de motocicletas.Para cualquier pregunta o inquietud, no dude en ponerse en contacto con nuestro equipo de servicio al cliente. Features: Color: Black Light Color: Red/Blue/Green 1-6 Gear Display Fitment: Kawasaki Ninja ZX6R Non-ABS 1998-2002 Instruction Guide: Disclaimer: Do not install the product if you do not have basic mechanical skills please. If you have any questions, please contact your retailer. 1. Remove the seat and lift the fuel tank. 2. Locate the speed sensor coupler. The speed sensor is mounted on the front sprocket cover and a 3-pole black speed sensor coupler is located 20-40 cm (8"-16") from the sensor. The connector is accessible under the fuel tank (W650: behind the left side cover). Verify: Separate the speed sensor coupler (you may need to use a small flathead screwdriver to separate the coupler). Rotate the wheels with the ignition on. The speedometer should read 0. If so, turn off the ignition and proceed to the next step. Otherwise, if the speedometer registers a non-zero speed, you did not disconnect the correct coupler and should look again. 3. After separating the speed sensor coupler, plug in both the male and female 3-pole Geefy's hip harness connectors. Make sure the connector is fully seated. 4. Locate the RPM signal wire. ZX-6R, ZZR600: Tachometer wire light blue (solid light blue wire) on dashboard connector or ECU connector ZX-9R: Pickup coil (crankshaft sensor) connector under fuel tank 3-pole, white triangular connector yellow (solid yellow line) W650: Pickup coil (crankshaft sensor) 4-pole connector behind left side cover Black/White (solid black line with thin white stripe) 5. Peel off the black sleeve (tape). Leave approximately 3 cm (1.2 inches) of this wire exposed. 6. Connect the Jefy's Hip black/green wire to this wire using the supplied red wire tap connector. Package Contents: 1 x Gear Indicator
Manufacturer: MUTYNE
Part number: MUTYNE
Item weight: 150 g
Packing size: 3 x 2 x 1 cm; 150 g
Size: One Size
br>Color: Red
Quantity: 1
Bienvenido a nuestra tienda y le deseamos una agradable experiencia de compra.somos fabricantes profesionales de piezas de motocicletas.Para cualquier pregunta o inquietud, no dude en ponerse en contacto con nuestro equipo de servicio al cliente. Features: Color: Black Light Color: Red/Blue/Green 1-6 Gear Display Fitment: Kawasaki Ninja ZX6R Non-ABS 1998-2002 Instruction Guide: Disclaimer: Do not install the product if you do not have basic mechanical skills please. If you have any questions, please contact your retailer. 1. Remove the seat and lift the fuel tank. 2. Locate the speed sensor coupler. The speed sensor is mounted on the front sprocket cover and a 3-pole black speed sensor coupler is located 20-40 cm (8"-16") from the sensor. The connector is accessible under the fuel tank (W650: behind the left side cover). Verify: Separate the speed sensor coupler (you may need to use a small flathead screwdriver to separate the coupler). Rotate the wheels with the ignition on. The speedometer should read 0. If so, turn off the ignition and proceed to the next step. Otherwise, if the speedometer registers a non-zero speed, you did not disconnect the correct coupler and should look again. 3. After separating the speed sensor coupler, plug in both the male and female 3-pole Geefy's hip harness connectors. Make sure the connector is fully seated. 4. Locate the RPM signal wire. ZX-6R, ZZR600: Tachometer wire light blue (solid light blue wire) on dashboard connector or ECU connector ZX-9R: Pickup coil (crankshaft sensor) connector under fuel tank 3-pole, white triangular connector yellow (solid yellow line) W650: Pickup coil (crankshaft sensor) 4-pole connector behind left side cover Black/White (solid black line with thin white stripe) 5. Peel off the black sleeve (tape). Leave approximately 3 cm (1.2 inches) of this wire exposed. 6. Connect the Jefy's Hip black/green wire to this wire using the supplied red wire tap connector. Package Contents: 1 x Gear Indicator
Manufacturer: MUTYNE
Part number: MUTYNE
Item weight: 150 g
Packing size: 3 x 2 x 1 cm; 150 g
Size: One Size
br>Color: Red
Quantity: 1
Share
