1
/
of
4
Auto Parts Tokyo
Pajico Resin Liquid Large Capacity UV-LED Resin Star Drop Hard Type 500g Transparent Made in Japan 403242
Pajico Resin Liquid Large Capacity UV-LED Resin Star Drop Hard Type 500g Transparent Made in Japan 403242
Regular price
$113.00 USD
Regular price
Sale price
$113.00 USD
Unit price
/
per
Shipping calculated at checkout.
Condition: New
Couldn't load pickup availability
A one-component resin that cures with both UV-LED light (405nm) and UV light (365nm). It does not yellow over time and maintains its crystal-like transparency. Ingredients: Acrylic photocuring resin Capacity: 500g / Bottle size: Diameter 66mm x H226mm The quality and capacity are the same, but the price is now reasonable and affordable. Country of origin: Japan Sturdy hard type, fast curing, beautiful transparency, no yellowing after curing, compatible with UV/LED light.
[Features] - One-component resin that cures with both UV-LED light (405nm) and UV light (365nm).・Does not yellow over time* and maintains its crystal-like transparency. - Ultra-fast curing type that starts curing in about 1 to 2 seconds with UV-LED light and hardens in about 30 to 90 seconds. -Water resistant and durable finish after curing.・Not only soft molds but also silicone molds can be used for a beautiful finish. - Cures well even in sunlight.・After complete curing, there is little stickiness and a beautiful finish. -Can be used to make transparent molds or as a surface coating agent. *Due to aging, resin-specific discoloration may occur. [Advice regarding irradiation] Star Drops will harden with both LED light and UV light.・When using an LED light, the wavelength of the LED is either "405nm" or "365nm".・The dedicated light "UV-LED smart light" is equipped with these two wavelengths, so you can use it with confidence. [Curing time] UV-LED light (when using 6W to 9W) 30 to 90 seconds UV light (when using 36W) 2 to 4 minutes Sunlight (on sunny days) 30 to 90 seconds Sunlight (on cloudy days) 3 to 10 minutes (depending on the thickness of the work and the season) *If colored, please irradiate for longer than the above time. [Caution] - If the resin is removed from the mold while it is still hot, the mold may be damaged.・Cannot be used in microwave or oven.・If the liquid gets into your eyes, it may cause inflammation, corneal damage, and vision impairment. Please handle with care.
[Features] - One-component resin that cures with both UV-LED light (405nm) and UV light (365nm).・Does not yellow over time* and maintains its crystal-like transparency. - Ultra-fast curing type that starts curing in about 1 to 2 seconds with UV-LED light and hardens in about 30 to 90 seconds. -Water resistant and durable finish after curing.・Not only soft molds but also silicone molds can be used for a beautiful finish. - Cures well even in sunlight.・After complete curing, there is little stickiness and a beautiful finish. -Can be used to make transparent molds or as a surface coating agent. *Due to aging, resin-specific discoloration may occur. [Advice regarding irradiation] Star Drops will harden with both LED light and UV light.・When using an LED light, the wavelength of the LED is either "405nm" or "365nm".・The dedicated light "UV-LED smart light" is equipped with these two wavelengths, so you can use it with confidence. [Curing time] UV-LED light (when using 6W to 9W) 30 to 90 seconds UV light (when using 36W) 2 to 4 minutes Sunlight (on sunny days) 30 to 90 seconds Sunlight (on cloudy days) 3 to 10 minutes (depending on the thickness of the work and the season) *If colored, please irradiate for longer than the above time. [Caution] - If the resin is removed from the mold while it is still hot, the mold may be damaged.・Cannot be used in microwave or oven.・If the liquid gets into your eyes, it may cause inflammation, corneal damage, and vision impairment. Please handle with care.
Share
