1
/
of
4
Auto Parts Tokyo
ORGA Magnus Barrel 6.23mm for electric gun 455mm ORGA-MB455
ORGA Magnus Barrel 6.23mm for electric gun 455mm ORGA-MB455
Regular price
$70.00 USD
Regular price
Sale price
$70.00 USD
Unit price
/
per
Shipping calculated at checkout.
Condition: New
Couldn't load pickup availability
Country of origin: Japan
The MAGNUS barrel is designed with a large inner diameter of 6.23mm, so by reducing the friction inside the tube to the maximum, it is possible to reduce the friction and resistance applied to the force of the BB bullet trying to travel straight. can. This allows shooting with high straightness and high accuracy. The performance of MAGNUS barrel is compatible with all electric guns and survival game styles. The bullet collecting performance in long shooting (also known as velocity custom) settings has been highly praised by many Sabah gamers. A stable trajectory is achieved in both full auto/semi-auto mode, and accuracy when using a magnification scope is increased, making it possible to develop rich games. Cutting the upper part reduces the distortion of the bullet feeding port. The Magnus barrel has a lower height on the left side where the HOP's rubber goes down. By incorporating this process, when HOP is applied (pressed from above), the gap (deflection) between this low-height part and the packing is pulled, so that the bullet feeding port side The design is such that the rubber will not be stretched. This has the advantage that the shape of the bullet feeding port does not change (airtightness prevents leakage). There are two slits on the left and right sides of the barrel, allowing the chamber gasket to be attached to the barrel with it rotated 90 degrees. Normally, the packing has a protrusion inside to hang the HOP, but the BB bullet that is fired will have a higher collection ability if the HOP is hung on the flat surface rather than on this protrusion. Up until now, the method used was to turn the packing inside out and use a file or router to remove the protrusions and create a flat surface, as shown below, but the process depends on the skill of the player doing the work and the tools used. Accuracy was affected by the roughness and unevenness of the surface. Additionally, forcing the product inside out would stretch the gasket itself, resulting in leaks of confidential information. By simply aligning the slits inside the packing with the slits on the left and right and installing it, you can create a perfect surface HOP without having to cut any holes inside the packing. No safety warning
The MAGNUS barrel is designed with a large inner diameter of 6.23mm, so by reducing the friction inside the tube to the maximum, it is possible to reduce the friction and resistance applied to the force of the BB bullet trying to travel straight. can. This allows shooting with high straightness and high accuracy. The performance of MAGNUS barrel is compatible with all electric guns and survival game styles. The bullet collecting performance in long shooting (also known as velocity custom) settings has been highly praised by many Sabah gamers. A stable trajectory is achieved in both full auto/semi-auto mode, and accuracy when using a magnification scope is increased, making it possible to develop rich games. Cutting the upper part reduces the distortion of the bullet feeding port. The Magnus barrel has a lower height on the left side where the HOP's rubber goes down. By incorporating this process, when HOP is applied (pressed from above), the gap (deflection) between this low-height part and the packing is pulled, so that the bullet feeding port side The design is such that the rubber will not be stretched. This has the advantage that the shape of the bullet feeding port does not change (airtightness prevents leakage). There are two slits on the left and right sides of the barrel, allowing the chamber gasket to be attached to the barrel with it rotated 90 degrees. Normally, the packing has a protrusion inside to hang the HOP, but the BB bullet that is fired will have a higher collection ability if the HOP is hung on the flat surface rather than on this protrusion. Up until now, the method used was to turn the packing inside out and use a file or router to remove the protrusions and create a flat surface, as shown below, but the process depends on the skill of the player doing the work and the tools used. Accuracy was affected by the roughness and unevenness of the surface. Additionally, forcing the product inside out would stretch the gasket itself, resulting in leaks of confidential information. By simply aligning the slits inside the packing with the slits on the left and right and installing it, you can create a perfect surface HOP without having to cut any holes inside the packing. No safety warning
Share
