1
/
of
4
Auto Parts Tokyo
No drilling required! 200 Series Hiace SGL Low Price Edition Car Carrier 0166
No drilling required! 200 Series Hiace SGL Low Price Edition Car Carrier 0166
Regular price
$162.00 USD
Regular price
Sale price
$162.00 USD
Unit price
/
per
Shipping calculated at checkout.
Condition: New
Couldn't load pickup availability
Material: Metal Package weight: 1.52kg - A low-priced version of the 200 series Hiace Super GL that can be installed without any processing - Can be installed without drilling - It is convenient to have radio pliers or inner lining removal. A 14mm wrench is required only if there is a rear seat belt. - The slide bar can be easily removed by loosening the knob bolt by hand. - Estimated load capacity is 10 kg. Color: Black
Remove the plastic cap in the luggage compartment using needle-nose pliers or peeling off the lining. If there is a rear seatbelt, remove the plastic cover with a flathead screwdriver, loosen the anchor bolt inside with a 14mm wrench, and remove the seatbelt. Move the pillar and lining. From under the lining, insert the clip nut into the blind trapezoidal hole where you removed the plastic cap. At that time, insert it so that the nut side is facing outward. You can choose from 4 locations on each side to hang the bar: 3 locations with plastic caps and 4 locations using the screw holes when the handrail is removed. Tighten the bracket with the knob bolt and attach the slide bar. If you want to lower the height of the bar, please purchase the optional extension stay fittings (can be installed without a screwdriver and comes in 8cm, 12cm, and 16cm sizes), which are available at an additional cost. If the extension stay is not used, the height of the ceiling at the center of the slide bar is approximately 13 cm. Caution (Disclaimer) > Please read carefully We do not guarantee any accidents, damage, or injuries caused by this product. Please use at your own risk by thoroughly checking safety, being careful not to overload, and reinforcing if necessary. Please understand this before using the product, or if you are unable to do so, please refrain from purchasing.
Manufacturer: NAMINORIKOZOU
Brand: NAMINORIKOZOU
Model name: 0166
Package size: 91 x 9.3 x 9.3 cm; 1.52 kg
Product model number : 0166
Discontinued by the manufacturer: No
Color: Black
Item weight: 1.52 Kilograms
Remove the plastic cap in the luggage compartment using needle-nose pliers or peeling off the lining. If there is a rear seatbelt, remove the plastic cover with a flathead screwdriver, loosen the anchor bolt inside with a 14mm wrench, and remove the seatbelt. Move the pillar and lining. From under the lining, insert the clip nut into the blind trapezoidal hole where you removed the plastic cap. At that time, insert it so that the nut side is facing outward. You can choose from 4 locations on each side to hang the bar: 3 locations with plastic caps and 4 locations using the screw holes when the handrail is removed. Tighten the bracket with the knob bolt and attach the slide bar. If you want to lower the height of the bar, please purchase the optional extension stay fittings (can be installed without a screwdriver and comes in 8cm, 12cm, and 16cm sizes), which are available at an additional cost. If the extension stay is not used, the height of the ceiling at the center of the slide bar is approximately 13 cm. Caution (Disclaimer) > Please read carefully We do not guarantee any accidents, damage, or injuries caused by this product. Please use at your own risk by thoroughly checking safety, being careful not to overload, and reinforcing if necessary. Please understand this before using the product, or if you are unable to do so, please refrain from purchasing.
Manufacturer: NAMINORIKOZOU
Brand: NAMINORIKOZOU
Model name: 0166
Package size: 91 x 9.3 x 9.3 cm; 1.52 kg
Product model number : 0166
Discontinued by the manufacturer: No
Color: Black
Item weight: 1.52 Kilograms
Share
