Makita Rechargeable Impact Driver (Olive) 18V Battery/Charger/Case Sold Separately TD173DZO

Japan's first "all-around" ring-emitting LED light, optimal balance, all-around slim head, and comfortable operability. *For domestic rechargeable impact drivers. As of December 2022, according to Makita research. Visibility during work has been significantly improved. Approximately 2.5 times brighter (compared to Makita's previous 18V model). Illuminance can be switched in 3 levels (strong/medium/weak). *For domestic rechargeable impact drivers. As of December 2022, according to Makita research. Can also be used as a work light. . Can also be used as a simple light in "light mode". Lighting time is about 1 hour. New trigger switch. Intuitive trigger shift operation is possible from low to high speeds.Grip part close to shaft center. The hand you hold is close to the head, making it easy to press the shaft core. Reduces cam-out. Offsets the battery to the rear. The center of gravity has been optimized to allow for well-balanced tightening in all directions. Also, interference with obstacles is reduced. The operation panel is located at the "back" and is easy to see and use. You can operate the mode and check the remaining battery capacity while holding it. Bit runout is the industry's smallest, and double ball bearings are used. Newly shaped bit sleeve. Ribs on the edges prevent damage even if the sleeve hits a component. *For domestic cordless impact drivers. According to Makita research, December 2022. Tilt angle of approximately 10.5°. Excellent corner driving performance reduces cam-out. Comfortable when working near walls. The most suitable mode can be selected according to the work. Mode memory function. By pressing two buttons at the same time, you can register one frequently used mode.Use the button at hand to switch between the "most recently used mode" and the "registered mode".DC 18V, sliding type Li-ion battery specification. Battery and charger sold separately. Tightening capacity: Machine screws M4 to M8/Ordinary bolts M5 to M16/High strength bolts M5 to M14/Coarse thread 22 to 125mm. Maximum tightening torque: 180N・m. Rotation speed [revolutions/min]: Fastest 0-3,600/strong 0-3,200/medium 0-2,100/weak 0-1,100. Easy mode rotation speed [rotations/min]: Wood 0-1,800/Volt 0-3,600/Tex thin plate 0-2,900/Tex thick plate 0-3,600. Number of blows [times/min]: Fastest 0 to over 3,800 Medium 0 to 3,600 0 to under 2,600 0 to 1,100. Easy mode number of blows [times/min]: Wood 0 to 3,800/Volt 0 to 3,800/Tex thin plate Stops immediately after the start of the blow/Tex thick plate 0 to 2,600. 1 charge work amount (wood screws material lauan φ4.3 x 65 mm Approximately 960 units Dimensions of this machine: Length 111mm x Width 81mm x Height 234mm. Mass: 1.5kg (including battery)

Japan's first "all-around" ring-emitting LED light adopted, optimal balance & all-around slim head & comfortable operability *Among domestic rechargeable impact drivers. As of December 2022, according to Makita research. Visibility during work is greatly improved. . Approximately 2.5 times brighter (compared to Makita's previous 18V model). Illuminance can be switched in 3 levels (strong/medium/weak). *For domestic rechargeable impact drivers. As of December 2022, according to Makita research. Can also be used as a work light. . Can also be used as a simple light in "light mode". Lighting time is about 1 hour. New trigger switch. Intuitive trigger shift operation is possible from low to high speeds.Grip part close to shaft center. The hand you hold is close to the head, making it easy to press the shaft core. Reduces cam-out. Offsets the battery to the rear. The center of gravity has been optimized to allow for well-balanced tightening in all directions. Also, interference with obstacles is reduced. The operation panel is located at the "back" and is easy to see and use. You can operate the mode and check the remaining battery capacity while holding it. Bit runout is the industry's smallest, and double ball bearings are used. Newly shaped bit sleeve. Ribs on the edges prevent damage even if the sleeve hits a component. *For domestic cordless impact drivers. According to Makita research, December 2022. Tilt angle of approximately 10.5°. Excellent corner driving performance reduces cam-out. Comfortable when working near walls. The most suitable mode can be selected according to the work. Mode memory function. By pressing two buttons at the same time, you can register one frequently used mode.Use the button at hand to switch between the "most recently used mode" and the "registered mode".DC 18V, sliding type Li-ion battery specification. Battery/charger sold separately Tightening capacity: Machine screws M4 to M8/Ordinary bolts M5 to M16/High strength bolts M5 to M14/Coarse thread 22 to 125mm Maximum tightening torque: 180N・m Number of revolutions [rotations/min]: Fastest 0 to 3,600/strong 0-3,200/medium 0-2,100/weak 0-1,100 Easy mode rotation speed [revolutions/min]: Wood 0-1,800/volt 0-3,600/tex thin plate 0-2,900/tex thick plate 0-3,600 blow Number [times/minute]: Fastest 0-3,800 strong 0-3,600 medium 0-2,600 light 0-1,100 Easy mode Number of blows [times/minute]: Wood 0-3,800/volt 0-3,800/tex thin plate Immediately after the start of the blow Stop/Tex Thick Plate 0 to 2,6001 Charging work load (wood screws, material lauan φ4.3 x 65 mm approx.): Approximately 960 units Dimensions of this machine: Length 111 mm x Width 81 mm x Height 234 mm Mass: 1.5 kg (including battery)


Brand: Makita
Product model number: TD173DZO
Product size: 11.1 x 8.1 x 23.4 cm; 1.04 kg
Color: Olive
Material: Plastic
>Power supply: ‎Battery powered
Voltage: ‎18
Laser class: ‎Variable speed
Accessories: ‎1, + bit 2-65/hook
Battery included: ‎No
Max. Revolutions (revolutions/min): ‎3600 revolutions per minute
Product weight: ‎1.04 Kilograms