KN Planning General-purpose Shock Absorber 180mm Swap Shock [Black/Red] Reprint Color

[Product Details] ■General-purpose 180mm cantilever type scooter rear shock. ■5-step adjustment type ■Depending on the car model, the mounting width for lower mounting [crankcase side] is narrow, so please adjust with the included washer. ■This is a moderate length shock that is necessary when doing a 90 engine swap on a YAMAHA 50/90cc body. ■Can also be used for general purposes. ■This is a reprint color. Limited. [Accessories] ■Body shock ■Adjusting washer ■Bolt 8mm ■Conversion collar (for example, when the existing bolt hole is 10mm) [Size] ■Bolt spacing 180mm ■Total length: 208mm ■Total width: 50mm [Maximum spring diameter] ■Bush side installation Part thickness: 20mm ■Inner diameter of the collar inside the bush: 10mm ■Space between the U-shaped part on the opposite side of the bush: 20.5mm ■Inner diameter of the mounting bolt hole in the U-shaped part: M8 Same) 7.5mm ■Spring size: 81 x 50mm [at the weakest preload] [Compatible models] ■YAMAHA 50/90cc body base [90 engine swap] vehicle ■Can also be used for general purposes. ■Moto component [Color] ■Body: Black ■Spring: Red


Manufacturer: ‎KN-KIKAKU
Brand: ‎KN-KIKAKU
Manufacturer reference: ‎SU-180-BKRD< br>Position: ‎Back