LED bulb T20 single pitch different part Equipped with 42 OSRAM 1734 chips Explosive light 20W 2200 lumen amber turn signal/back lamp set of 2 JU-173421S-T20-pinch

Socket: T20 single pitch part difference Starting voltage: 9-30V Compatible models: 12V only Polarity: Free Color temperature: 1700K (amber) Emitting color: amber (orange) Usage life: 50000h or more Light source: OSRAM 1734 chip Number of SMDs: 3 on top Side: 18 Power consumption: 20W (left and right set) Waterproof level: IP65 completely waterproof Lumens: 2200 lumens (left and right set) Current: 600±50mA/piece High brightness OSRAM 1734 LED chip Equipped with 21 units Equipped with the latest model 1734 LED, this bulb is dedicated to turn signals/back lamps and boasts a large amount of light with a total luminous flux of 1100LM. It's so bright that you can't see it directly, making it highly visible. ●The first radiant-type aluminum heatsink in a back lamp Equipped with a radiant-type aluminum heatsink, it enables rapid heat dissipation and prevents deterioration and damage to the LED chips due to heat. Equipped with a constant current circuit to ensure stable lighting without being affected by sudden vehicle voltage changes. It can also be safely used in hybrid vehicles. ●Uses special aluminum alloy ・Surface has been treated with anti-abrasive coating ・Easy to solve the problem of heat resistance, which is a weak point of LED, with special 6063 aluminum alloy As a result, even if the LED is turned on continuously for a long time, it will not blink or damage the LED.Packaging form: e-auto fun original packaging The brand name e-auto fun is a registered trademark of our company. *About warranty: Usage failure warranty is 90 days. The initial defective warranty is for one week after the product arrives.

Product Features ●Equipped with 21 high-brightness OSRAM 1734 LED chips.Equipped with the latest 1734 LED, this bulb is exclusively for turn signals/back lamps and boasts a large amount of light with a total luminous flux of 1100LM. It's so bright that you can't see it directly, making it highly visible. ●The first radiant-type aluminum heatsink in a back lamp Equipped with a radiant-type aluminum heatsink, it enables rapid heat dissipation and prevents deterioration and damage to the LED chips due to heat. ● Equipped with constant current circuit to ensure stable lighting without being affected by sudden changes in vehicle voltage. It can also be safely used in hybrid vehicles. ★High brightness, high quality, high efficiency ★New design that gives you a fresh feel ★Special aluminum alloy body ★360° no blind spot light emission ★Strong core to stabilize the light ★Independently developed four-layer board ★High output circuit ★Constant current & Overvoltage protection ★Reliably eliminates noise ●Uses special aluminum alloy ・Surface has been treated with anti-abrasive coating ・Easy to solve the problem of heat resistance, which is a weak point of LEDs, with special 6063 aluminum alloy The heat resistance problem is completely solved, so even if it is turned on continuously for a long time, it will not blink or damage the LED. - Adopts the latest high-precision control. - Adopts the latest high-precision control system R470 series. - The ability to control the current value is Significantly higher than conventional products - By reducing the current value, power consumption is reduced and energy-saving performance is improved - Safe light emission is achieved with a built-in constant current circuit Caution (Disclaimer) > Please read carefully Note *Please pay attention to the installation space. Please be careful. The bulb and rear heat sink require more space than halogen bulbs. Please check not only the shape of the cap but also the back space of the actual vehicle. *When the lamp is turned on, the lamp body and heat sink become extremely hot. Do not use this product on vehicles where the LED and lens are extremely close to each other, as the lens or housing may become deformed. *Please avoid installing or removing the product immediately after the lights are turned off, as this may cause burns or damage. *This product is precision and delicately made, so please handle with care. *When installing, do not put force on the light emitting part, but instead grasp the heat sink part. *Specifications may change depending on the product lot. *Under no circumstances will we be reimbursed for installation fees or damaged parts. *For some imported cars and domestic cars, the warning light may turn on or the warning light may turn on. This is not a product defect. A resistance canceller is required separately. [Caution for large vehicles] *This product is tested for a certain period of time using a constant voltage power supply (30V) that supports load fluctuations. However, depending on the car model, the electrical load such as starting power, charging control (voltage fluctuates), etc. may temporarily exceed 34V. At that time, the amount of current flowing to the valve increases, causing defects and damage (short circuits, etc.). Please be sure to check the maximum voltage of your vehicle before use.


Manufacturer: e-auto fun
Brand: e-auto fun
Model name: JU-173421S-T20-pinch
Package size: ‎12.3 x 8.8 x 2.2 cm; 30 g
Product model number: ‎JU-173421S-T20-pinch
Position: ‎Back
Valve shape: ‎T20
Number of bolts: ‎30 bolts
br>Color: ‎Amber
Certification: ‎1 year
Product weight: ‎30 g