IRIS OHYAMA LSL-ACTN-2400 Outlet Type LED Motion Sensor Light, Waterproof Specification, Brightness 2400 Lumens, Outlet 3m

An LED security sensor light that automatically turns on when the sensor detects human movement. Lit. If it continues to be detected, the light will switch and remain bright for 60 seconds. (Sensing time can be set to turn on between 5 seconds and 5 minutes) [Continuous light mode to support work] Continuously lights up with full light emission. [Easy to operate] Modes can be switched by simply twisting the knob on the sensor. You can also adjust the brightness of each mode with two brightness settings. [LED light] The brightness of the entire surface is up to 600lm. Because the lights are installed in high places, we installed LEDs that require fewer replacements or replacements. In addition, the unique wavelength of LED light makes it difficult for insects to get attracted to it, so it is easy to place it in entryways, walkways, and gardens. [Angle adjustment to suit the location] Can be adjusted up to 110° vertically and 145° horizontally. [Rainproof type that is safe even when wet] Rainproof type that can be used not only in the rain but also outdoors where dust and dust fly. It can be installed safely even in places without a roof. [Finely adjustable sensing area] Adjust the sensing area by simply attaching a cover to the sensor. You can adjust the sensor to easily react to cars and plants swaying in the wind, so you can prevent unnecessary lighting. Increase the number of displayed items

●Product size (cm): Width approx. 10.6 x Depth approx. 18.1 x Height approx. 15.6 ●Mass (including cord): Approx. 670g ●Power cord length: Approx. 3m ●Accessories: Mounting screws x 2, concrete sleeve x 2 , sensor cover, clamp set (mounting plate, L-shaped fitting, cap for L-shaped fitting, wing nut) [Sensor light specifications] ・Model number: LSL-ACSN-600 (1 light type) ・Light source color: Daylight color/Bulb color ・Total luminous flux (maximum): 600lm ・Detection sensor: Infrared passive sensor ・Lighting mode switching: Security mode/Stand on mode/Coming home mode ・Brightness switching: Strong/Weak (half the brightness of strong) ・Lighting time: Approx. 5 seconds to approximately 5 minutes, continuous ・Power supply: AC100V (50/60Hz) ・Power consumption (when lit): Approx. 6.8W ・Power consumption (when standby): Approx. 0.5W or less ・Sensor detection distance: Approx. 8m ・Sensor detection Angle: Approximately 140° (sensing angle at a distance of 2m) - Installation location: indoors/outdoors - Waterproof performance: IP44 (protection against splashes) - Operating temperature: -20°C to 40°C *Product specifications are subject to change without notice. There is. Please note.


Brand: ‎IRIS OHYAMA
Product model number: ‎LSL-ACTN-2400
Product size: ‎18.1 x 10.6 x 15.6 cm; 500 g
Color : ‎Luminous flux 2400lm
Name on nameplate: ‎Cord type
Material: ‎Nickel
Wallpaper pattern: ‎Luminous flux 2400lm
Power supply: ‎Power cord type
Voltage: 100 volts
Quantity: 1
Light source: ‎LED
Laser class: ‎Waterproof
Accessories: ‎Mounting screws x 2, concrete sleeve x 2, sensor cover, clamp set (mounting plate, L-shaped fittings, caps for L-shaped fittings, wing nuts)
Warranty: None
Paint features: Infrared rays
Product weight: 500 g