House BM inside cutter (inner cutter) HIS46DG

●For cutting from the inner surface of standing PVC pipes ●Electric motor used: 100mm disc grinder (M10 x P1.5), angle electric drill ●High-speed rotation guide rollers and rotating thrust receiving function allow workers to easily adjust the working position Cutting work can be done from a fixed position without changing the cutting position. - Cutting length (maximum length 150 mm) can be changed by adjusting the movement of the rotating thrust receiver. - Grip designed for speed and stability of cutting work. &Rotating guide roller ●Cutting adaptability: PVC pipe VU50~VU300, PVC pipe VP50~VP200 ●Maximum cutting wall thickness (mm): 10.5

Caution: Please use the motor in forward rotation. Make sure the product is suitable for the workpiece material. Perform work at the rotation speed and feed rate that are appropriate for the product and workpiece material. Do not attach or detach any parts of the product, such as the center drill or center pin, with your bare hands. Do not remove cuttings or debris with bare hands. Before starting work or during installation, make sure that all parts of the product are securely locked so that they do not come loose. (Even when shipped as new, there may be loose parts such as the shank and spindle to facilitate replacement depending on specification selection.) When storing, please keep out of reach of children. Warning: Do not allow anyone who does not understand the instruction manual, warnings, and labels to use this product. Also, when lending a device, please lend it along with the instruction manual. Handle the motor according to the instructions in the motor instruction manual. Wear safety glasses. Please wear a mask. Do not work on the hems of pants or the sleeves of clothing. Please remove ties, washcloths, etc. from around your neck before working. If you have long hair, please cover it with a hat or hair cover. Do not wear gloves. Do not touch the rotating product. Do not remove cuttings or debris while the product is rotating. Hold the electric motor securely with both hands. Be sure to keep your feet steady and maintain good balance as you work. Please drill the hole straight to the object. Do not use it if you do not have the physical strength to hold the electric motor. Please use an electric motor with a clutch. Please wear a hard hat. Do not use with an electric motor that is equipped with a brake or that applies a brake. (There is also the risk of disassembling during operation, damaging the workpiece or surrounding areas, or causing injury.) Products designed for rotation should only be used in rotation mode. (When using a Z-axis spindle (SDS type), use it in rotation mode. Impact mode is not possible.) Do not use products for rotation or vibration in impact (impact) mode. (When using the Z-axis spindle (SDS type), please use it in rotation mode. Impact mode is not possible.) Before use, make sure that each part is firmly locked so that there is no loosening. . (There is also the risk of disassembling during work, damaging the workpiece or surrounding areas, or causing injury.) Thoroughly inspect the product before use, and never use it if it is damaged or loose. (There is also the risk of disassembling during work, damaging the workpiece or surrounding areas, or causing injury.) Be sure to properly attach the machine's safety cover and material rebound prevention device before working. (For chip saws and diamond cutters) Use a power supply equipped with a leakage interrupter to prevent electric shock. (When using water) Wear rubber boots and rubber gloves. (When using water) Wear a safety belt when working at heights. Take measures to prevent cutting pieces from falling. Restrict access of third parties to the work site.


Brand: House B.m
Product model number: HIS46DG
Package size: 38 x 9.3 x 9.2 cm; 905 g
Product weight: ‎ 905g