House BM Core Drill for Dragon ALC ALB ALB-35 (Body)

●For drilling holes in ALC materials (with reinforcing bars) and plasterboard ●Used electric motor: electric drill, vibration drill, SDS lightweight hammer drill (rotation mode) ●For ALC materials (with piano wire and reinforcing bars) Compatible blade design allows comfortable work in rotation mode ●Thermal sprayed dragon grooves on the outer periphery of the core are highly effective in discharging chips, allowing speedy drilling even in wet ALC materials. ! Center Drill's non-screw locking mechanism allows you to easily remove cutting debris without disassembling the core drill body. ●The newly developed Radius One Shank System allows for easy replacement with other sized core bodies. ●Equipped with Z-axis spindle (SDS type) as standard. Compatible with straight type and SDS type electric drills. ●Size (φ): 35 ●Effective length (mm): 150 Increase the number of displayed items

Caution: Please use the motor in forward rotation. Make sure the product is suitable for the workpiece material. Perform work at the rotation speed and feed rate that are appropriate for the product and workpiece material. Do not attach or detach any parts of the product, such as the center drill or center pin, with your bare hands. Do not remove cuttings or debris with bare hands. Before starting work or during installation, make sure that all parts of the product are securely locked so that they do not come loose. (Even when shipped as new, there may be loose parts such as the shank and spindle to facilitate replacement depending on specification selection.) When storing, please keep out of reach of children. Warning: Do not allow anyone who does not understand the instruction manual, warnings, and labels to use this product. Also, when lending a device, please lend it along with the instruction manual. Handle the motor according to the instructions in the motor instruction manual. Wear safety glasses. Please wear a mask. Do not work on the hems of pants or the sleeves of clothing. Please remove ties, washcloths, etc. from around your neck before working. If you have long hair, please cover it with a hat or hair cover. Do not wear gloves. Do not touch the rotating product. Do not remove cuttings or debris while the product is rotating. Hold the electric motor securely with both hands. Be sure to keep your feet steady and maintain good balance as you work. Please drill the hole straight to the object. Do not use it if you do not have the physical strength to hold the electric motor. Please use an electric motor with a clutch. Please wear a hard hat. Do not use with an electric motor that is equipped with a brake or that applies a brake. (There is also the risk of disassembling during operation, damaging the workpiece or surrounding areas, or causing injury.) Products designed for rotation should only be used in rotation mode. (When using a Z-axis spindle (SDS type), use it in rotation mode. Impact mode is not possible.) Do not use products for rotation or vibration in impact (impact) mode. (When using the Z-axis spindle (SDS type), please use it in rotation mode. Impact mode is not possible.) Before use, make sure that each part is firmly locked so that there is no loosening. . (There is also the risk of disassembling during work, damaging the workpiece or surrounding areas, or causing injury.) Thoroughly inspect the product before use, and never use it if it is damaged or loose. (There is also the risk of disassembling during work, damaging the workpiece or surrounding areas, or causing injury.) Be sure to properly attach the machine's safety cover and material rebound prevention device before working. (For chip saws and diamond cutters) Use a power supply equipped with a leakage interrupter to prevent electric shock. (When using water) Wear rubber boots and rubber gloves. (When using water) Wear a safety belt when working at heights. Take measures to prevent cutting pieces from falling. Restrict access of third parties to the work site. ※※The image is for illustrative purposes only.Please check the ※※


Brand: ‎House B.m
Product model number: ‎ALB-35
Product size: ‎19 x 3.5 x 3.5 cm; 200 g
Material: ‎Diamond
Laser class : ‎Rotation
Product weight: ‎200 g