Gursoy Yankee Horn Air Horn Car Shiflet Horn A-1403 (24V)

[High and sharp tone not found in other companies' products] Shifflet horns, which are often used as Yankee horns with deep bass, can enjoy extremely high pitched and sharp tones. [3-month warranty for peace of mind] If a problem occurs during normal use within 3 months of receiving the product, please rest assured that we will replace the product free of charge. [Specifications] Total length 22cm, operating voltage 24V, rated current 3A, volume 110-125dB (when measured from 2m away), compatible hose inner diameter 8mm [Accessories] 1 air hose, 3-pronged (for air hose branching), Japanese instruction manual, 2 female terminals [Applicable car models] 12V cars, motorcycles, etc. [Applicable car models] 12V cars, motorcycles, etc.

Caution (Disclaimer) > Please read [Notes] - Be sure to install the fuse and horn relay. If a horn relay is not installed, the following may occur. ◯If the genuine horn switch seizes up, a fire may occur. ◯In severe cases where the wiring overheats, the wiring may catch fire and cause a fire. ◯ If only the wiring from the genuine switch is used, the horn's magnetic switch will not operate due to insufficient voltage and no sound will be produced. -Be sure to insulate the wiring from the battery to the horn during installation to prevent short-circuiting. -This requires an air tank, air compressor, air hose, and horn relay separately.・Please do not sound the horn for a long time. It will be the cause of the failure.・Please be careful about electrical wiring and air piping.・Please install it in a position that does not interfere with driving/driving. (Please stop using it if it interferes with driving.) - Not compatible with vehicle inspections.・We apologize for the inconvenience, but please note that we do not provide support for installation. - Connecting accessory horn piping from the vehicle's air tank is extremely dangerous as it may cause problems with the brake system. When installing the air horn, we recommend purchasing an air tank for the air horn separately and using a dedicated compressor.・When replacing the terminal, please remove the coating of the enameled wire thoroughly before attaching it. Otherwise, the power will not turn on. Please use the air pressure between 3kg and 12kg.


Manufacturer: ‎Ansel
Brand: ‎Gürsoy
Packing size: ‎26 x 9 x 9 cm; 460 g
Manufacturer reference: ‎A-1403
Manufacturer Discontinued by: ‎No
Number of bolts: ‎12 bolts
Product weight: ‎460 g