fcl. T16 T15 LED Back Lamp, White, 6500K, 4000 lm, Compatible with Vehicle Inspections, Non-Polarity, Long Life, Explosive Heat Dissipation, 12 V, For Cars, Left and Right 2 Pieces

Renewal from late November 2022! 1.8 times brighter than the old model! 10 times the brightness compared to the original product [Make your car shine even more with sharp pure white LEDs] FCL's T16 LED back lamp emits a burst of light with approximately 10 times more lumens than halogen, ensuring the brightness and durability required for vehicle inspections. I pursued it thoroughly. It is possible to replace it with LED as a part for the new RAV4 50 series, Voxy 80 series, Vellfire, and Land Cruiser Prado. Available color is white. Since the color is set as white as the inspection standard, white is recommended over the light bulb color. Reliable support with 1 year warranty. Make your car life brighter and safer with fcl car parts. [Feature 1: Light emitting point similar to the genuine product] FCL products are not only bright, but by placing them close to the same light emitting point as the genuine product, there are no blind spots and the light distribution provides the best performance. By bringing the chips closer together, you can get an even and genuine light distribution. [Feature 2. Stays bright even over time] The lumen value you should be aware of is the value after stabilization. The brightness of FCL's LED hardly changes even after one minute after it is turned on. Immediately after lighting: 4,480lm → After stabilization (1 minute after lighting): 4,000lm Approximate time required for parking is 1 minute. We have developed an LED that maintains its brightness rather than becoming significantly darker immediately after it is turned on. [Feature 3. Pure white LED changes the rear view] Dramatically changes the unstylish look of the original bulb to a stylish look. It will enhance the charm of your car even more. Furthermore, the rubber on the pedestal has been changed from light blue to black, making it look neat even when it's not lit. [Feature 4. Cooling fins dissipate heat to the outside of the unit] The cooling fins on the outside of the unit dissipate heat quickly, so there is no need to worry about heat being trapped inside the unit. The efficient heat dissipation structure prevents premature failure due to heat and maintains brightness even after lighting. [Feature 5. Careful design] Adopts a thick copper base to prevent contact failure. The thin copper base instantly transfers the heat generated by the LED chip to the cooling fins, improving heat dissipation. With wiring, there is a space up to the socket and prevents the genuine socket from malfunctioning due to heat. The main body is made of aluminum alloy, which has both strength and thermal conductivity, increasing durability. [Feature 6. Prevent breakdowns by ensuring stable voltage] Car battery voltage goes up and down depending on engine speed and conditions. The LED body is equipped with a constant current circuit so that the voltage that fluctuates is always kept constant. By constantly receiving a stable voltage, the load placed on the LED is reduced and can be used for a long time. [Feature 7. Excellent waterproof/dustproof performance of IP65] Prevents failure due to rain and dust, allowing you to use it for a long time. [Specifications] 12V [Warranty period] 1 year [Kelvin number] White White [Power consumption] 28W [Lumen number] 2000 lm (one side) [Set contents] Valve x 2, adjustment rubber x 4, simple manual [Polarity] Non-polar [1 year warranty "as many times as you want" & vehicle inspection compatible].This product meets domestic vehicle inspection standards including color, cut lines, etc. [Product design compatible with vehicle inspection]. Furthermore, at FCL, we guarantee that all parts are covered by the warranty during the warranty period (1 year), and we will perform replacements and inspections as many times as necessary during the warranty period to ensure your peace of mind. At our company, we conduct inspections such as cut lines and lumen counts that meet vehicle inspection standards by a domestic specialized agency, and we actually inspect the bulbs before shipping to ensure that the color matches the vehicle inspection standards. Rest assured that we provide products that meet domestic vehicle inspection standards to protect the safety of not only owners, but also passengers, other vehicles, and pedestrians. Regarding warranties, there are cases where other companies' long-term warranties limit the number of replacements (only once), or where only some parts of a product set have a short warranty period. In the unlikely event that a problem occurs for the second time during the warranty period, we will provide warranty support [as many times as you like]. If there is a problem with the product, we will also cover the [round-trip shipping costs], and support will be provided by specialized staff in Japan. In the unlikely event of a malfunction or problem, please contact our customer support directly.




Manufacturer: ‎fcl.
Brand: ‎fcl.
Package size: ‎14.3 x 11.9 x 6.4 cm; 120 g
Manufacturer reference: ‎FLED-T16HI09W
Position: ‎Right, left
Special notes: ‎Dust-proof, waterproof
Number of bolts: ‎12 volts
Color: ‎White
Certification: ‎If there is a defect within the warranty period or you would like to exchange the product due to a mistake in your purchase, please contact us directly. We will correspond according to the warranty contents stipulated by our company. Please be sure to check the details in the notes before purchasing.
Product weight: ‎120 g