Echoes Products Nissan New Lukes 40 Series Highway Star Front Grille Garnish Blue Finish Accessory Dress Up Parts Custom

This is a front grill garnish exclusively for the new Luke's Highway Star. This garnish is attached to the genuine grill fins on the left and right sides of the front emblem, and goes perfectly with the genuine Highway Star front plating. By installing it, you can add an accent to the front face and create a higher-grade dress. Installation is as simple as attaching the double-sided tape to the back of the product, so anyone can easily enjoy dressing it up. This product is a product designed specifically for the vehicle model, created by scanning 3D data from the actual vehicle and using a special mold. In particular, we put a lot of effort into adjusting the fitting on the actual vehicle, making adjustments and checking many times to achieve a high-quality fitting. Because this is a product that will be installed on your precious car, we have carefully created it with attention to detail. Please take this opportunity to try this product and enjoy a wonderful car life. [Compatible models] ■Nissan Lukes 2020~ 5AA-B44A 4AA-B45A 5AA-B47A 4AA-B48A Compatible grades Highway Star X (2WD/4WD) Highway Star X ProPilot Edition (2WD/4WD) HighwayStar G Turbo ProPilot Edition (2WD/4WD) *Only available before minor changes. It is not supported after minor changes. [Set contents] ■Product body 2P Double-sided tape attached to the back of the product [Material] ■Stainless steel (SUS304) [Color] ■Blue finish [About warranty] ■1 month after the product arrives *After removing the double-sided tape We cannot accept returns or exchanges for any reason. [Caution] - Please be careful not to splash water or apply force for 24 hours after installation. -If you are concerned about the adhesive strength, please prepare double-sided tape separately.・Once the double-sided tape is removed, we cannot accept returns or exchanges for any reason. Before installation, please be sure to perform temporary alignment and carefully confirm the pasting position before installing.・Before installing the product, be sure to have the surface to which it is attached wipe off any oil and clean it before attaching the double-sided tape. If you attach double-sided tape with oil or dirt still attached to the mounting surface, the adhesion strength of the double-sided tape will decrease and there is a risk of the product peeling off or coming off. Please be sure to perform the above cleaning before installation.・There is no guarantee against scratches or damage to this product or during use. Please use at your own risk. Caution (Disclaimer) > Please read ■Notes■ *Please acknowledge the contents of this item before ordering* Before installing the product, be sure to wipe off any oil from the mounting surface, clean it, and then apply the double-sided tape. Please install it. If you attach double-sided tape with oil or dirt still attached to the mounting surface, the adhesion strength of the double-sided tape will decrease and there is a risk of the product peeling off or coming off. Before installing the product, please be sure to check the installation position and the fitting before applying the double-sided tape. We cannot accept returns or exchanges under any circumstances after the red film on the double-sided tape on the back of the product is removed. Please check the product in advance. Although we take great care in inspecting and packaging our products, in rare cases, products may be slightly damaged due to impact during transportation. If there is no problem with installation, we may not be able to accept exchanges/returns of the product. In order to protect the quality of stainless steel products from impact during transportation and storage, we apply a transparent film sheet to the surface of the product to prevent scratches. When the product arrives at the customer, please remove the film and install it. At that time, the adhesive of the film may adhere to the product itself. We apologize for the inconvenience, but please remove the adhesive film using a commercially available sticker peeler. We cannot accept exchanges or returns due to film adhesive marks, etc. Depending on the car model, there may be minor changes or specification changes. The compatible car models and grades listed on the product page are information that has been confirmed to be installed at our store based on the actual car, but please check the shape of the car where the item will be installed before purchasing. Compatibility information for each product We do not confirm compatibility with vehicles other than those listed in the vehicle model and grade, or with vehicles equipped with other companies' aero parts.


Manufacturer: ‎Echoes Products
Brand: ‎No-brand product
Manufacturer reference: ‎sky002-14-blue
Exterior condition: ‎Stainless steel
Color: ‎Blue