Datasystem Side Camera Kit (Standard Type) for Forester (SJ5 / SJG) SCK-49F3N Datasystem

Confirm safety when turning left or parallel parking Smartly installed with a camera cover designed specifically for each vehicle Model-specific side camera kit that supports driving by showing the blind spot on the left side on a monitor High-sensitivity super CMOS sensor in the camera body Equipped with a high-visibility image quality design that makes it easy to see obstacles even in dark places

Product introduction: Smartly installed with a camera cover designed specifically for each vehicle type!! The vehicle-specific side camera kit is a convenient camera kit that supports safe driving by showing the blind spot on the left side on a monitor. The camera cover is specially designed for each vehicle model, so it can be installed in the original style, giving it a smart appearance. The camera body has a high-resolution design that makes it easy to see obstacles not only in bright places but also in dark places. We fully support safety confirmation. *The shape of the side camera cover varies depending on the vehicle model. *This product is for mounting on the left side mirror. Precautions for use ● This product is exclusively for DC12V vehicles. ● Be sure to use the supplied power harness. You cannot use anything other than the accessories. ● Be sure to have the product installed by a contractor with specialized knowledge and equipment. ●Before installation work, be sure to disconnect the battery negative terminal and shut off the power to the vehicle. Installation without shutting off the power may lead to serious accidents such as short circuits and electric shocks. However, before disconnecting the negative battery terminal, write down the contents of the radio's memory that you would be concerned about if they disappear, and re-enter them after installation is complete. Please refer to the device's instruction manual for input methods. ● Please be careful when routing the wiring to avoid damaging the wiring on the vehicle and this product. Also, be sure to properly route the wiring to prevent water from entering the vehicle. ● The butyl rubber on the back of the LED is for waterproofing purposes, so never remove it. ● Never disassemble or modify this product. ● Make sure to attach it firmly so that it does not fall off the vehicle. ● Do not disconnect the power harness before use (extension is possible). The power supply harness is connected to the power circuit and fuse, so if these are disconnected, it may not work properly or cause a malfunction on the vehicle side. ● Never install the product using any method other than those described in the installation manual. ● If the included pin terminal cable is not long enough, please prepare an extension cable separately. ● The sense of distance in camera images differs from the actual distance due to viewing angle, lens shape, etc. ● The brightness and color tone of the camera image may change immediately after the camera is turned on or while the camera is in use, but this is a symptom that occurs because the camera detects the surrounding brightness and corrects the image. ,This is not a malfunction. ● Do not perform high-pressure washing using automatic car washes, etc. Water may enter the product and cause malfunction. ● Be sure to attach the camera body of this product to the vehicle together with the camera cover. ● The power supply part on the power harness gets hot, so never touch it while this product is in operation or for a while after operation. ● We are not responsible for any accidents, illegal acts, vehicle breakdowns, or damage that occur while using this product. ● The videos or photos used on the website are for illustrative purposes only and may differ from the actual product. ● This product must be installed by a contractor with specialized knowledge and equipment. ● We are not responsible for any accidents, illegal acts, vehicle breakdowns, damage, theft, etc. that occur as a result of installing or using this product. ● Please note that product specifications, prices, and designs are subject to change without notice due to improvements. ● Product names and compatibility information are protected by copyright law. It is strictly prohibited to divert, copy, modify, post, distribute, sell, publish, etc. any part or all of the information on the website (including the design) without permission or permission from Data Systems. ● This product is designed exclusively for Japanese specification cars. Never install this product on a car with overseas specifications, as this may cause malfunctions or accidents. Additionally, installation, sale, and use outside of Japan is prohibited. Even if the product is used outside of Japan, we do not assume any responsibility or warranty. ● This product is designed for Japanese specification vehicle. A serious breakdown and accident might be caused when install it in an oversea specification vehicle. And sale, installation or use outside of Japan is prohibited.The manufacturer is not responsible for use of this pro


Manufacturer: Data System
Brand: Data System
Model name: SCK-49F3N
Package size: 26.2 x 12.1 x 6.3 cm; 344 g
Product model number: ‎SCK-49F3N
Number of bolts: ‎15 bolts
Product weight: ‎344 g