Comtech Radar Detector ZERO 703V Free Data Update Compatible with Mobile Orbis/Small Orbis/Zone 30 OBD2 Connection GPS Meter Function Drive Recorder Cooperation

■3-year warranty for peace of mind ■3.2-inch MVA LCD ■Equipped with G-sensor/gyro sensor/illumination sensor ■Over 160,000 GPS data included ■Over 40,000 inspection data included ■Power supply voltage: DC12V only ■Minimum/maximum consumption Current: 100mA or less / 350mA or less ■Reception method: Parallel 33ch ■Positioning update time: Double superheterodyne ■Detection method: Minimum 0.2 seconds/FM tracking time count method ■Operating temperature range: -10℃~60℃ ■Supported SD cards: SDHC/microSDHC card 4GB~32GB ■Body size: 108(W) x 59.8(H) x 21.2(D)/mm (excluding protrusions)

■ Equipped with an ultra-fast CPU to improve warning accuracy Achieved 250% faster GPS positioning updates than before! Significantly reduces warning errors and enables more accurate warnings. In addition, the display speed of speedometers and other devices can be extremely fast! ■ Compatible with drive recorder mutual communication By connecting to a Comtech drive recorder that supports mutual communication, you can supply power to the drive recorder, receive video/audio signals, operation signals, GPS information, etc. OBDII information can be communicated! *Separately sold option: Drive recorder intercommunication cable [ZR-13] or [ZR-14] is required. - Check the video of the drive recorder! With this product, you can check the video/audio recorded by the connected drive recorder.・You can operate the drive recorder! You can configure and operate the drive recorder with this product.・Send GPS information to your drive recorder! By sending the GPS information of this product to your drive recorder, you can record your vehicle's driving speed and location information. Date and time information is also automatically set and corrected. - Send OBD2 information to the drive recorder! OBD2's accurate vehicle speed information allows you to record your vehicle's driving speed even if GPS is interrupted. *By using the drive recorder's dedicated viewer software, you can also check the throttle opening, engine speed, intake manifold pressure, and engine water temperature.・Power can be supplied to the drive recorder! Power can be supplied from this product to the drive recorder, allowing for smart wiring. *If this product is connected with a cigarette plug cord, the drive recorder may restart when the engine is restarted in some idling stop cars. In that case, by using the included cigarette plug cord or option to directly power the drive recorder from the vehicle such as option ZR-01, HDROP-05/HDROP-09, it will not restart even in an idling stop vehicle. - Can be connected to models that do not support mutual communication! Even if you use a Comtech drive recorder that does not support mutual communication, you can supply power to the drive recorder and connect it to this product by using the separately sold optional drive recorder connection cable [ZR-12]. The video/audio input can be easily installed with just one cable! Equipped with Orbis interlocking mode Equipped with an Orbis interlocking mode that automatically switches to external input display when you approach Orbis while connected to a drive recorder. Also, when you approach Orbis, you will be notified by highlighting the Orbis camera position (3 fixed patterns: top/left/right) in red. ■Compatible with mobile small Orbis Compatible with "small Orbis" alarms that can be installed in narrow places where it could not be installed before, such as residential roads and areas designated as Zone 30. Furthermore, in addition to the ``Small Orbis Alarm,'' which used to be a warning based on location information, this product can now also issue a radar warning by supporting the new control frequency. *Radar warning cannot be performed depending on the type of small Orbis. ■ Compatible with the new traffic regulation "Zone 30" Compatible with the new traffic regulation "Zone 30" which limits the speed limit to 30km/h in areas where residential roads are densely populated! When you enter near the area, you will be notified with a warning screen and an announcement. An icon will notify you when you are driving within the area. ■Equipped with a speed warning point warning The system will issue a warning as a "speed warning point" at points where the maximum speed changes, where there is a high possibility of enforcement on the expressway. ■3D map warning display The newly added 3D map warning display, which is updated every 100m, makes it even easier to understand the positional relationship between your company and Orbis. Additionally, at 2km points (expressways only), a 2D map will be displayed full screen to make it easier to understand the approximate location. ■Alarms are easy to understand with the LED flash! The LED lights up and flashes in conjunction with the vehicle speed and alarm. You can also fix it to a single color. *You can also set the LED to OFF. ■LED lighting with a focus on light The lower part of the liquid crystal shines in a line with LEDs that can be selected from blue/red/orange/white/green. The touch switch section also lights up, improving operability at night. ■Download the latest data for free even via wireless LAN! - By using the optional wireless LAN built-in SDHC card [WSD8G-803V], data such as GPS data, public enforcement information, and enforcement sharing system information can be downloaded and updated for free via wireless LAN. Possible. You can also change the settings of the radar detector itself using your smartphone.


Manufacturer: COMTEC
Brand: COMTEC
Model name: ZERO 703V
Product size: 2.12 x 10.8 x 5.98 cm; 118 g
Product model Number: ‎ZERO 703V
Discontinued by the manufacturer: ‎No
Product dimensions: Depth x Width x Height: ‎21 x 108 x 60 mm
Number of bolts: ‎12 bolts
>Installation size: 72(H)×108(W)×47(D)/mm
Product weight: 118 g