Cloudlifter CL-1 by Cloud Microphones Cloud Microphone Cloudlifter Microphone Amplifier Microphone Preamp Activator Microphone Booster [Japanese Installation Guide and Original Cloth Included] Genuine Japanese Product (CL-1 + GOTHAM 0.5m Cable)

✅ [High-quality preamplifier] The Cloudlifter CL-1 is the standard model in the Cloudlifter series released by Cloud Microphones, which has received tremendous support as a microphone booster. It is an in-line microphone preamplifier that uses phantom power (48v) to convert to an ultra-clean gain of up to +25dB and boost the audio signal. ✅ [Clear and up to 25dB amplification] Adds up to 25dB of gain to passive microphones with low output such as dynamic microphones and ribbon microphones. By amplifying the microphone signal before inputting it to the preamplifier while keeping it clear, the original performance of the microphone is maximized. ✅ [Useful in situations where noise is a problem] It is useful in situations where you are using a passive microphone and are troubled by noise, such as when the output level of the microphone you are using is low or the noise of the preamp you are using is large, or as a countermeasure against noise picked up by a long cable, on live stages and recording sites. In addition, since the microphone signal can be boosted immediately after the sound source, it has the effect of suppressing noise, and is also effective for XLR lines of acoustic guitars. ✅ [Easy, just connect! 】It is very easy to use, just connect an XLR cable between your audio interface and the microphone, and finally turn on the phantom power switch on the audio interface. This alone will significantly increase the volume of your passive microphone, which was previously quiet. ※※※Please note※※※This unit requires phantom power. ✅【The Cloudlifter series has sold over 300,000 units worldwide】It is loved by not only YOUTUBER and podcasters, but also musicians, PAs, and recording engineers, and is used for a variety of purposes, from world-class concert halls to radio production. ✅【Selectable XLR cable】You can choose from two types of cables: CANARE, which has a clear high range, or Gotham, which has a natural and wide range. Both manufacturers use Neutrik connectors, and the products are soldered and assembled by reliable domestic specialty stores. ✅ [Product Overview of Cloudlifter Series] ・Can be used with low-output passive microphones such as dynamic microphones and ribbon microphones ・Amplifies output passive microphone signals up to 25dB using phantom power ・Durable and portable for use in studios, stages, broadcasting stations, etc. ・Remarkably clean and amplified audio signal ・Ideal for recording directly with a DAW using a low-output dynamic microphone. ・No phantom power is applied to the microphone side, protecting delicate ribbon microphones from damage. ✅ [MADE IN USA] Award-winning ribbon microphones and Cloudlifter series from Cloud Microphones ✅ Please note that the muffled sound may be affected by the environment and the connected equipment. If the sound is muffled, increase the volume itself instead of the gain to adjust it to a volume that is not buried in the surrounding sounds, and make sure that the volume is not buried in the clean tone. Also, check the tone control of the sound and adjust it to improve the muffled sound. In addition, the sound coming from the amplifier is greatly influenced by the surrounding environment, so please understand that the way the sound is heard and felt may differ depending on the listener. ✅・If you are concerned about noise such as white noise, depending on the usage environment and personal perception, the noise may be objectively noticeable as the signal volume of the sound increases when using the product. In addition, since it may be caused by a defective phantom power supply of the connected audio interface, the noise may be felt depending on the usage environment and connected equipment. Lower the signal volume of the sound of the equipment you are using and check if the noise decreases. ・If there is no sound, please check (1) whether the phantom power supply switch is ON, or (2) whether the cord is capable of supplying phantom power. ・If there are any other problems with the feel of use, please provide us with the details of the problem and information such as the usage environment and the type and specifications of the equipment to which the product is connected and we will guide you on how to deal with it. Increase the number of items displayed