Carmate Car Smartphone Holder, Car Holder, Dashboard [Suction Cup Installation] Easy to Hold with One Hand [Long Arm] Black SA33

You can easily hold your smartphone with one hand by simply pushing it in while placing it on the inside of the arm. It can be easily removed by simply pulling the smartphone towards you. Strong installation is possible not only by fixing with a suction cup but also by joining the included special plate to the ball joint. Even if the suction cup should come off, the ball joint prevents it from falling off. (A flat surface with a diameter of 62 mm is required for installation.) The long arm allows installation from the back of the dashboard. By changing the arm, you can choose a position where your smartphone is difficult to see while driving, or a position where your viewpoint is less likely to shift. The angle and direction of the holder can be adjusted even after attaching the suction cup. [Compatible smartphones] Width 55mm to 88mm, thickness 15mm or less, weight 250g or less

Smartphone holder equipped with a reliable double lock function that prevents the holder from falling off. Adopts a double lock mechanism with a suction cup and ball joint to prevent the holder from falling off. In addition to fixing with the suction cup, the included special plate can be joined to the ball joint. This allows for a strong installation. Even if the suction cup should come off, the ball joint prevents it from falling off. ●Easy one-handed quick hold If you first set the holder arm to match the width of your smartphone, you can easily hold it with one hand from then on. Just press your smartphone against the inside of the arm and the spring force from the side will hold your smartphone. In addition, the structure allows you to release the hold by simply pulling the held smartphone toward you, so it can be easily removed without any hassle. *If the hold feels weak, please set the width one step tighter. *If you are using a smartphone cover made of soft material, it may be difficult to remove your smartphone from the holder. ●You can choose the position of the holder By changing the arm, you can choose between a position where the smartphone is difficult to see when driving (super low position) or a position where there is little movement of the viewpoint (regular position). ●The angle and orientation of the holder can be adjusted.By joining the holder part and the base with a ball joint, the angle can be adjusted up, down, left and right by 55 degrees. The suction cup base can be rotated 150° with the suction cup attached by releasing the lock lever. ●Long arm allows installation even from the back of the dashboard The arm that connects the holder from the base is long, making it easy to reach even if the suction cup is attached to the back of the dashboard. It also features a wide range of motion and a wide range of adjustment. ●Can be held while charging The structure allows you to hold your smartphone with the left and right arms, so you can hold a smartphone with the charging terminal at the bottom while charging it. *If the charging terminal is on the side, you may not be able to charge while holding it. (The maximum height of the left and right arms that come into contact with the smartphone is approximately 35 mm) ●Before purchasing - This product is a product that attaches the special plate that comes with the car body with adhesive tape, and then attaches the main body on top of it.・A flat surface with a diameter of 62 mm or more is required for pasting the plate. - Do not attach the suction cup of this product to any location other than the included special plate.・Cannot be pasted on locations where the main unit faces downwards, curved surfaces, flocked or fabric surfaces, or large uneven surfaces. - The size of the smartphone that can be held is 55mm to 88mm in width and 15mm or less in thickness. Compatible with items weighing less than 250g. *Even if the case is attached, it can be used as long as it is within the size that can be held. *Depending on the position of the fall prevention ring and the shape of the case, it may not be possible to hold it stably. *Depending on the model, whether a case is attached or not, and the shape of the case, it may interfere with the volume control button, power button, etc. - Do not install on dashboards made of genuine leather, synthetic leather, or soft skin. Doing so may damage the mounting surface or leave mounting marks. *Representative car models with dashboards that cannot be installed (as of August 2022) ・Toyota: RAV4 (H31.4~), Harrier ・Nissan: X-Trail (R4.7~) ・Honda: Step Wagon (R4.5~) ・Mazda : General・Lexus: General・Imported cars: General ●Notes・Using a smartphone while driving is prohibited by law. Please stop in a safe place before operating.・Do not attach it to the windshield, side glass of the driver's seat or passenger seat, or in a place that will obstruct the forward view, as this is a violation of the "Safety Standards for Road Transport Vehicles."・This product is for use inside a car. Do not use for any purpose other than its intended purpose. - Do not install it in a location where it will interfere with airbag activation or driving.・Before use, be sure to make sure that this product or smartphone, etc. is firmly fixed. There is a risk of it falling off or falling. - Do not use on vigorous driving or rough roads.・Do not leave your smartphone in the car. Safety Warning ●Before purchasing - This product is a product that attaches the special plate that comes with the car body with adhesive tape, and then attaches the main body on top of it.・A flat surface with a diameter of 62 mm or more is required for pasting the plate.・Place the suction cup of this product on the included special stick.


Manufacturer: ‎CARMATE
Brand: ‎CARMATE
Model name: ‎SA33
Package size: ‎17.3 x 13.4 x 11.4 cm; 210 g
Product model number : ‎SA33
Special notes: ‎Adjustable angle, rechargeable
Color: ‎Black
Product weight: ‎210 g