Carmate Toyota Corolla Cross exclusive [Genuine grade] Air conditioner drink holder [For driver's side] Tool-free installation Silver NZ829

[Drink holder for Toyota Corolla Cross driver's seat] This is a drink holder designed specifically for the driver's seat of Corolla Cross (from September 2021) right-hand drive cars. Since it is designed exclusively for the Corolla Cross, we use resin that has been colored to match the interior color of the Corolla Cross. The body has a surface design that matches the interior of the Corolla Cross, and the top frame matches the color of the air conditioner vents (excluding special edition models). [Dedicated design that does not interfere with the turn signal lever] General drink holders that are attached to the air conditioner outlet may interfere with the turn signal lever on the driver's seat and cannot be installed, but this product does not interfere with the turn signal lever. The cross-specific design makes it possible to attach it to the air conditioner outlet. Because it is specially designed, it can be installed in the best position, and even if you change the steering wheel position or operate the turn signal lever, it will not interfere and will not interfere with driving. [Air conditioner direction can be adjusted] Since it is attached to the vehicle without using air conditioner fins, you can adjust the direction of the air conditioner fins, unlike drink holders that are usually attached to air conditioners. We designed the air conditioner fin to be easy to operate by providing an air conditioner fin operation port on the top of the drink holder. You can also keep your drinks hot or cold using the air from the air conditioner. [Can hold drinks of various sizes] Compatible with drink containers with a diameter or diagonal length of 53 to 74 mm when viewed from above. (For cafe cups, chilled cups, etc. that spread from the bottom to the top, the size at 79mm from the bottom must be 74mm or less.) Additionally, there is a flap inside the holder to make it possible to hold thin cans. . [With sponge cushion] The bottom of the drink holder is equipped with a sponge material cushion, which prevents drinks from rattling and making rattling noises while driving. *The cushion is made of sponge material, but it does not absorb water from condensation or spills from drinks. [Easy installation with no tools required (approximate installation time: 8 minutes) Insert the included mounting base into the gap between the air conditioner vents and install the main unit.No tools are required, so it can be easily installed. The design allows for installation without scratching the interior or leaving installation marks.

● Toyota Corolla Cross Drink holder for driver's seat This is a drink holder designed and designed exclusively for the driver's seat of Corolla Cross (from September 2021) right-hand drive cars. ●Sophisticated exclusive design that looks just like a genuine product Since it is designed exclusively for the Corolla Cross, we use resin that has been colored to match the interior color of the Corolla Cross. The body has a surface design that matches the interior of the Corolla Cross, and the top frame matches the color of the air conditioner vents (excluding special edition models). -Special design that does not interfere with the turn signal lever A general drink holder that is attached to the air conditioner outlet may not be able to be installed because the main body interferes with the turn signal lever on the driver's seat, but this product does not interfere with the turn signal lever. The special design allows it to be installed on the air conditioner outlet. Because it is specially designed, it can be installed in the best position, and even if you change the steering wheel position or operate the turn signal lever, it will not interfere and will not interfere with driving. ●The direction of the air conditioner can be adjusted Because it is attached to the vehicle without using air conditioner fins, the direction of the air conditioner fins can be adjusted, unlike drink holders that are normally attached to air conditioners. We designed the air conditioner fin to be easy to operate by providing an air conditioner fin operation port on the top of the drink holder. You can also keep your drinks hot or cold using the air from the air conditioner. ●Can hold drinks of various sizes Compatible with drink containers with a [diameter] or [diagonal length] of 53 to 74 mm when viewed from above. (For coffee cups, chilled cups, etc. that spread from the bottom to the top, the size at 79mm from the bottom must be 74mm or less.) Additionally, there is a flap inside the holder to make it possible to hold thin cans. . 〇 Examples of containers that can be stored - Thin cans: diameter approx. 53mm: canned coffee / energy drinks, etc. - Thick cans: diameter 74mm or less: 350ml cans / 500ml cans, etc. - PET bottles: diameter 74mm or less: large capacity plastic bottle containers such as 600ml・Cafe cup: Convenience store coffee/Coffee specialty store cup, etc. ・Chilled cup: Coffee drink *PET bottles with a constricted shape may not be stable. Also, do not store empty drink containers as they are unstable. ●With sponge cushion The bottom of the drink holder is equipped with a sponge material cushion, which prevents drinks from rattling and making rattling noises while driving. *The cushion is made of sponge material, but it does not absorb water from condensation or spills from drinks. ●Easy installation with no tools required (estimated installation time: 8 minutes) Insert the included mounting base into the gap of the air conditioner outlet and attach the main unit. Easy to install as no tools are required. In addition, the special design allows for installation without scratching the interior or leaving any installation marks. AA11 Safety Warning ●Before purchasing - This product is only for the driver's side of the following right-hand drive vehicles. [As of May 2022 (Reiwa 4) (later vehicles have not been investigated)] Toyota Corolla Cross (ZSG10 / ZVG11 / ZVG15 from September 2021 (Reiwa 3)) - This product is attached to the attached mounting base and main body. This is a product that attaches to interior parts with adhesive tape. ●Caution: Please read carefully. Do not leave a drink unattended or place a drink weighing more than 650g.・Do not place items that may deform, change in quality, or explode due to heat (gas lighters, aerosol products).・It may not be stable when driving on rough roads or depending on the shape of the drink container. Check the stability before use. Please be especially careful with constricted drink containers as they are not stable.・Do not place empty drink containers as they are unstable.・Depending on the shape and material of the drink container, it may be difficult to put it in and take it out. In that case, when the car is parked, hold the holder body while inserting and removing it. - If you cannot insert or remove a tall drink container because it hits the pillar, please insert or remove it diagonally. - Do not put anything between the air conditioner outlet and this product. It may get inside the air conditioner.


Manufacturer: CARMATE
Brand: CARMATE
Model name: NZ829
Product size: 14.3 x 17.6 x 8.4 cm; 310 g
Product model number : NZ829
Product dimensions: Depth x Width x Height: 14.3 x 17.6 x 8.4 cm
Color: Silver
Product weight: 310 g