Bullcon 920,000 pixels embedded small camera AV-FBC02R
Bullcon 920,000 pixels embedded small camera AV-FBC02R
Regular price
$139.00 USD
Regular price
Sale price
$139.00 USD
Unit price
/
per
Condition: New
Number of effective pixels: 920,000 pixels Output image: Normal image/mirror image switchable (RCA output) Angle of view: Horizontal 140°, Vertical 80°, Diagonal 160° Minimum illuminance: 0.3 lux Protection grade: IP68 (waterproof/ dustproof)
Operating temperature range -30℃ ~ +85℃ Protection class IP68 External dimensions W17.3mm x H17.3mm x D16.5mm (lens section 10.3mm) Harness length Camera: 2m Intermediate harness: 2m Power video harness: 6.5m Camera weight 24g (Including cord) Total packaging weight 261g Package size W110 × H160 × D60 (mm) Uses a 920,000-pixel color 1/4-inch CCD sensor with high sensitivity, high definition, and high resolution, allowing for clearer images even at night. became. The camera body is ultra-compact at 17.3mm, and ultra-lightweight, and three types of fixing holders are included, so you can place it anywhere you want. Even after installation, you can freely change the camera angle using the included special pin. *Depending on the mounting position, drilling work is required on the vehicle side. Waterproof and dustproof protection meets the highest IP68 standard. Comes with a normal image/mirror image switching function, so you can use it as a front camera, side camera, or rear camera. If you want to add it to a navigation system that already has a rear camera installed, you can use both the rear camera and the additional camera by using the optional camera selector (AV-CS100). Precautions for use: This product is for DC+12V/minus ground vehicles only. Do not use at voltages other than those specified. After finding the specified wire, be sure to disconnect the negative terminal of the battery before wiring. If you work on it without removing it, there is a risk of short-circuiting, which is very dangerous. Do not install it in a location that may interfere with driving or in a location other than the designated location. Never use safety parts (steering, brake pedal, etc.) when installing this product or wiring the body ground using vehicle bolts and nuts. Please do not disassemble, process or modify this product. This product is waterproof, but if water gets into it, please stop using it immediately and return it to us along with the warranty card. If this product emits smoke, a strange odor, or a strange noise, please stop using it immediately and return it to the store where you purchased it or our company along with the warranty card. Do not install or wire the product in a location that may interfere with the operation of the airbag. Never connect the power supply of other equipment by cutting the power wire insulation. After wiring, be sure to insulate with vinyl tape, etc. Also, be sure to insulate any wires that will not be wired with vinyl tape, etc. After wiring, please bundle it with an insulation lock so that it does not interfere with driving. When routing the wiring, be sure to avoid getting the harnesses caught in moving parts such as seat rails. This product is an in-vehicle camera. Please do not use it for any purpose other than in-vehicle use. Additionally, the camera is intended to assist the driver's visibility and cannot display all dangers and obstacles. Be sure to check visually. This product uses a wide-angle lens, so nearby areas appear wide and distant areas appear narrow, which may differ from the actual sense of distance. This product can be connected to a monitor with an RCA terminal video input, but the camera video interlocking functions (interrupt display, etc.), scale display, and parking assist line display will be set on the connected device. For this reason, we cannot guarantee the operation of linked functions. Please install this product at a retailer with installation skills. After installation, please confirm that it is securely fixed. Do not cut each wire in the middle. Also, be sure to route the power wire so that it does not touch any metal parts of the vehicle. Do not route the power line directly to the battery. Do not wash your car in an automatic car wash or with high-pressure water. Water may enter the camera or the camera may fall. If the lens surface or product body freezes, do not heat it with a lighter, etc. When installing this product, if you drill holes or otherwise modify parts of the vehicle, be careful of scratches, damage, and water intrusion after processing. In the unlikely event that damage, water intrusion, rust, etc. occur, we will not be held responsible in any way. The image may look poor depending on the surrounding brightness (reflection of light, etc.) or the weather (water droplets in the rain, etc.), but this is not a malfunction. Product design, specifications, appearance, color, etc. may change or production may be discontinued without notice. Please also note that the color of the product photos may differ slightly from the actual product.
Manufacturer: Bullcon
Brand: Bullcon
Model name: Bullcon
Product size: 6 x 11 x 16 cm; 24 g
Product model number: AV-FBC02R
Special notes: Color 1/4 type CCD sensor
Product dimensions Depth x Width x Height: 6 x 11 x 16 cm Number of bolts: 12 Bolt
Resolution: 920,000 pixels
Color: Black
Certification: None
Product weight: 24 g
Operating temperature range -30℃ ~ +85℃ Protection class IP68 External dimensions W17.3mm x H17.3mm x D16.5mm (lens section 10.3mm) Harness length Camera: 2m Intermediate harness: 2m Power video harness: 6.5m Camera weight 24g (Including cord) Total packaging weight 261g Package size W110 × H160 × D60 (mm) Uses a 920,000-pixel color 1/4-inch CCD sensor with high sensitivity, high definition, and high resolution, allowing for clearer images even at night. became. The camera body is ultra-compact at 17.3mm, and ultra-lightweight, and three types of fixing holders are included, so you can place it anywhere you want. Even after installation, you can freely change the camera angle using the included special pin. *Depending on the mounting position, drilling work is required on the vehicle side. Waterproof and dustproof protection meets the highest IP68 standard. Comes with a normal image/mirror image switching function, so you can use it as a front camera, side camera, or rear camera. If you want to add it to a navigation system that already has a rear camera installed, you can use both the rear camera and the additional camera by using the optional camera selector (AV-CS100). Precautions for use: This product is for DC+12V/minus ground vehicles only. Do not use at voltages other than those specified. After finding the specified wire, be sure to disconnect the negative terminal of the battery before wiring. If you work on it without removing it, there is a risk of short-circuiting, which is very dangerous. Do not install it in a location that may interfere with driving or in a location other than the designated location. Never use safety parts (steering, brake pedal, etc.) when installing this product or wiring the body ground using vehicle bolts and nuts. Please do not disassemble, process or modify this product. This product is waterproof, but if water gets into it, please stop using it immediately and return it to us along with the warranty card. If this product emits smoke, a strange odor, or a strange noise, please stop using it immediately and return it to the store where you purchased it or our company along with the warranty card. Do not install or wire the product in a location that may interfere with the operation of the airbag. Never connect the power supply of other equipment by cutting the power wire insulation. After wiring, be sure to insulate with vinyl tape, etc. Also, be sure to insulate any wires that will not be wired with vinyl tape, etc. After wiring, please bundle it with an insulation lock so that it does not interfere with driving. When routing the wiring, be sure to avoid getting the harnesses caught in moving parts such as seat rails. This product is an in-vehicle camera. Please do not use it for any purpose other than in-vehicle use. Additionally, the camera is intended to assist the driver's visibility and cannot display all dangers and obstacles. Be sure to check visually. This product uses a wide-angle lens, so nearby areas appear wide and distant areas appear narrow, which may differ from the actual sense of distance. This product can be connected to a monitor with an RCA terminal video input, but the camera video interlocking functions (interrupt display, etc.), scale display, and parking assist line display will be set on the connected device. For this reason, we cannot guarantee the operation of linked functions. Please install this product at a retailer with installation skills. After installation, please confirm that it is securely fixed. Do not cut each wire in the middle. Also, be sure to route the power wire so that it does not touch any metal parts of the vehicle. Do not route the power line directly to the battery. Do not wash your car in an automatic car wash or with high-pressure water. Water may enter the camera or the camera may fall. If the lens surface or product body freezes, do not heat it with a lighter, etc. When installing this product, if you drill holes or otherwise modify parts of the vehicle, be careful of scratches, damage, and water intrusion after processing. In the unlikely event that damage, water intrusion, rust, etc. occur, we will not be held responsible in any way. The image may look poor depending on the surrounding brightness (reflection of light, etc.) or the weather (water droplets in the rain, etc.), but this is not a malfunction. Product design, specifications, appearance, color, etc. may change or production may be discontinued without notice. Please also note that the color of the product photos may differ slightly from the actual product.
Manufacturer: Bullcon
Brand: Bullcon
Model name: Bullcon
Product size: 6 x 11 x 16 cm; 24 g
Product model number: AV-FBC02R
Special notes: Color 1/4 type CCD sensor
Product dimensions Depth x Width x Height: 6 x 11 x 16 cm Number of bolts: 12 Bolt
Resolution: 920,000 pixels
Color: Black
Certification: None
Product weight: 24 g