BMW digital micrometer BM-800

Material: Steel/ABS/Metal Accuracy: ±0.03mm Usable temperature: -10℃~40℃

<> This is a steel type micrometer that allows you to see the size at a glance with a digital display and can measure thin thicknesses such as coatings. :Measurement range = 0.01~12.7mm / Accuracy = ±0.03mm Never use it for purposes other than its intended purpose, as this may cause injury or accidents. Clean the measuring surface and if the digital display does not show "0" when you turn on the power, press the zero switch to reset it. Hold down the red measuring lever and retract the measuring pin, place the object to be measured between the measuring pin and the measuring pad, release your finger from the lever and take the measurement. The hold button allows you to fix the display of measured values, which is useful for measurements in places where the display is difficult to see. To release the fixed measurement value, press the hold button again. Never use the product for purposes other than its intended purpose, as this may cause injury or accidents. Before use, check for damage such as chips or cracks, and do not use if there is any damage. As this is a precision instrument, if the electronic parts get wet with rain or water, if you use an object that carries current, if you drop it from a high place or apply excessive shock to the LCD screen, it may be damaged or the accuracy of the measured value will be disrupted, making it impossible to measure. Please be careful. Please remove dust and dirt from the measuring surface before use. If there is dirt on it, use a soft cloth dampened with water to gently wipe it off, as using detergents may cause malfunction. Avoid direct sunlight and places with high temperature and humidity, turn off the power, remove batteries, and store in a protective case. Please keep out of reach of children.


Brand: Bigman
Product model number: BM-800
Product size: 9.5 x 5.5 x 2.2 cm; 102 g
Product weight: ‎102 g