Beat-Sonic Back Camera "Chameleon Mini" for Carrozzeria Navigation Connection for Light Vehicles BCAM7CY

■Back camera ■Color: Yellow ■Power supply: DC12V negative ground ■Current consumption: 55±5 mA ■Image direction: Mirror image (for rear confirmation only) ■Guidelines: None

- Designed exclusively for Carrozzeria navigation, it can be connected with a coupler on. ●This product complies with the "Protection Standards for Road Transport Vehicles Article 18, Paragraph 1, Item 2" (Protrusion Regulations). ●It is easy to install and can be installed in the fixing screw hole of the license plate. It can be seen clearly even at night. Splash-proof and waterproof construction for peace of mind. Chameleon type using the same color as the number. ●The number screw can be used as a camera!! Since the number plate (vehicle registration number plate) fixing screw hole is used, there is no need for drilling or other work, making it easy. ●Ultra-compact size! The camera body is ultra-small compared to conventional products (BCAM1/2), and can be installed without compromising the visibility of the license plate number. ●Clear images even in dark places High-sensitivity CMOS technology provides clear and easy-to-see images even in dark places. Can be used from daylight to night, and responds quickly to changes in light level. ●Wide-angle/mirror image Horizontal: Adopts a wide-angle lens of approximately 183 degrees to ensure a wide viewing angle. The video output is a mirror image type, so you can view it in the same way as in a rearview mirror. ●Splash-proof and waterproof structure. The rear camera body is drip-proof and waterproof! The camera cable is long, so you can pull it into the car without getting wet. ●This product complies with the "Protection Standards for Road Transport Vehicles Article 18, Paragraph 1, Item 2" (Protrusion Regulations). *BCAM7Y is exclusively for private light vehicles. Do not install on vehicles with license plates (registration number markers) of different colors. *This product is only for 12V negative ground vehicles. It cannot be used in 24V cars or positive earth cars. Precautions for use ●Please be sure to reconfirm compatibility before use. When using the product, please be sure to read the included instruction manual carefully and follow it. BCAM7CY is for private light vehicles only. Do not install on vehicles with license plates (registration number markers) of different colors. This product is only for 12V negative ground vehicles. It cannot be used in 24V cars or positive earth cars. On registered cars, the mounting screws have a seal on the left side of the license plate (registration number mark). Never remove it. This product is installed using the screws on the right side. This product is a mirror image output type exclusively for rear camera. Switching is not possible. Video output is NTSC (RCA pin) 1Vpp (75Ω). It can be connected to a TV/NAVI with a compatible input, but please check the specifications of your TV/NAVI regarding reverse gear linkage. This product is intended to assist the driver's visibility. When driving, please be sure to check safety with your own eyes. Do not disassemble or modify this product. This will not be covered by the warranty. Improper installation, connection, or use of this product may cause damage to vehicle equipment and will void the warranty. We do not provide any support for installing this product on illegally modified cars, poorly maintained cars, etc., or providing any warranty.


Manufacturer: ‎Beat-Sonic
Brand: ‎Beat-Sonic (Beat Sonic)
Model name: ‎BCAM7CY
Packing size: ‎22.8 x 14.2 x 6.5 cm; 367.99 g
Product model number: ‎BCAM7CY
Number of bolts: ‎12 volts
Color: ‎White
Product weight: ‎368 g