Ballistics Skateboard Stool Kit BALLISTICS SBS KIT BSA-1901

[Brand] BALLISTICS [Size] Seat height: Approximately 40cm (assuming deck thickness 10mm) Thickness of parts when stored: 45mm [Material] Resin molded parts: Nylon resin with glass fiber / Leg pipe: Aluminum (BLACK electrodeposition coating) ) / Attached countersunk screws: Steel (BLACK electrodeposition coating) *Specially designed product / Magnet: Neodymium magnet [Product contents] Aluminum leg pipe x 4 / Leg holder plate x 2 / Body block x 2 / Flat head screw x 10 (including 2 spares) [Package] Blister pack (approx.) 57 x 21.5 x 6.5cm/1.4kg *Specifications are subject to change without notice. [Note 1] The skateboard (deck) is not included with this product. Please prepare what you like. [Note 2] Compatible with boards with a board thickness of 11 mm or less and a foil base (inner hole to hole) of 350 to 400 mm. If it is longer than that, you can use it without using a "pole holder". (In that case, please carry the four leg parts separately.) For decks with short noses and long tails, such as OLD decks, the position of the legs will be offset considerably. Please be careful about your seating position when seated. Also, please note that some decks may not be able to be joined properly depending on the concave (curve of the board) position. (In that case, please refrain from forcibly joining or using it.) / There is originally a slight wobble (gap) between the leg pipe and the insert, but please note that this is the clearance required for the structure. [Note 3] Since the connection can only be made by tightening the special countersunk screws from the surface, if the countersunk screws are not deeply embedded, do not force the screws. ), the screw head will fit flat if you counterbore it a little. (Please be careful not to forcefully turn the screw as you may damage the Phillips screw head or damage the parts or deck.) *The bit for seat carving will look like this → (Search word: Star M High Speed) Hexagonal Shaft Chamfer Cutter NO.5007 8MM) When assembling, please pay close attention to how the legs stick, the unevenness of the installation surface, and the distance from the vehicle or wall when using it as a stepladder. This product contains a strong magnet, so please keep it away from objects that may cause problems due to magnetism. (Example: cards, precision equipment, recording media, PC-related products, watches, etc.)

Compact storage possible! A parts kit that turns your proud skateboard into furniture. BALLISTICS, a brand that produces many outdoor products and bags with a Tally feel, has released items recommended for those who like street culture. You can use your skateboard as furniture by attaching this product instead of attaching tracks to the 4 holes (2 locations) of the specified pitch on your skateboard deck. The biggest feature of this product is that instead of fixed legs, the four legs can be attached and detached using magnets, and the detached legs can be held in a holder on the back of the board for compact transportation. As a result, it can be used not only indoors but also outdoors, greatly expanding its versatility. Not only can it be used as a chair or table for camping or outdoor activities, but it can also be used as an additional chair for guests, store fixtures, display stands, TV racks, or a bench for two for children. The top of the skateboard has aluminum legs that make it very strong and stable, and it has enough strength that you can stand on it without any problems. It can also be used as a stepladder when picking up items from high places or loading and unloading car roof racks, and since it is not very deep, it can be used fairly close to the vehicle. It also looks smart when placed in the luggage compartment. (Note: Please do not jump on the top board, shake it forcibly, or put weight on the tip of the board.) Even when the legs are stored on the back, the ground surface is flat, so it can also be used as a super low table. Available.


Color: ‎Black
Packing size: ‎57.3 x 21.8 x 5.7 cm; 1.34 kg