ANDA-BURE-SU (REINFORCED PARTS) [SASUTEKKU] Sustec Under Brace Igunisu FF21S K12 ° C-WA05 A JULY, 2016-UBS13 UBS13

SUSTEC UNDER BRACE *The image is a representative image or an image of the product being worn. Ignis under brace (reinforcement parts)

- Precautions for use Confirmed with 1242CC.NA.4WD.HV.CVT *The product image is of a representative car model, and not all car models have the same shape. Depending on the car model, there are 2 or 4 points.・Minimum ground clearance may not be secured by installing this product. Please be sure to measure and confirm the minimum ground clearance and vehicle height before installation.・Depending on the vehicle, this product itself may become the lowest part of the vehicle and the minimum ground clearance may change. Therefore, please pay attention to the installed suspension, etc. so that the minimum ground clearance of 90 mm or more is maintained as specified in the safety standards and inspection guidelines. *This applies even to vehicles with normal suspension or our suspension. The above requirements must be met during vehicle inspections and periodic inspections, but the vehicle user must also take responsibility for maintenance and management.・The road clearance will be reduced after installation, so please be careful when driving.・Each measurement value is based on our measurement conditions. Please use this as a reference as there may be differences depending on the vehicle type and vehicle condition.・Please note that the minimum ground clearance data is based on the area where the underbrace is installed and is not measured for the entire vehicle.・Please note that installing this product may make it difficult to replace engine oil, transmission oil, etc.


Manufacturer: ‎Tanabe
Brand: ‎SEIKOH
Model name: ‎UBS13
Packing size: ‎150.01 x 24.99 x 5 cm; 3 kg
Product model number: ‎UBS13
Certification: ‎Subject to manufacturer's warranty
Product weight: ‎3 Kilograms