200 Series Hiace DX Car Carrier Set of 2 with Extension Stay and Pad 0301 No drilling required Easy to put on and take off Fishing Rod Ski Snowboard Stepladder Cleaning Tools Storage Rod Holder Rack Luggage Room Car Interior Car Custom Interior Bar

Very popular! This is an in-vehicle rack that can be installed on the 200 series Hiace Van DX without drilling holes. Hook the special metal fittings into the gap between the top plate and the side frame (car wall), and tighten the holding metal fittings with a screwdriver to secure it. (Instructions included for installation by flipping the top plate) The height of the bar is 55 mm from the bottom of the top plate when installed at the top. Furthermore, by using the 8-hole extension stay included in the kit, the lowest height can be lowered to 200 mm in 20 mm increments. The extension stay set has 2 each of 4-hole, 6-hole, and 8-hole stays. If you want to have 8 holes in both the front and rear, you can use it as an 8-hole stay by adding 4 holes and 6 holes. The load capacity is approximately 10kg. For 10kg or more but less than 15kg, please add the third bar product code: 0305. Wide car type 0302 is available. It can be installed without removing the top plate, but it can be installed neatly without wrinkles on the lining. When removing the top plate, please use two or more people.

[Compatible models] Toyota 200 series Hiace DX [Contents] - Attachment fittings x 4 - Slide bar x 2 (front and rear) - Board pad x 2 sets - Extension stay set - Sorry to keep you waiting! This is an in-vehicle rack that can be installed on the 200 series Hiace Van DX without drilling holes. By improving the conventional product and adding two screws, it is even more stable! Equipped with a star lock washer as standard to improve the bar from loosening. ●Easy to remove without drilling holes in the car wall with drills or screws. Comes with an installation manual that allows you to flip the top plate and install it. ●Can load surfboards, snowboards, skis, stepladders, etc. ●Hang the special metal fittings in the gap between the top plate and the side frame (car wall), and tighten the holding metal fittings to secure it. ●This kit includes a front bar, a rear bar, special attachment fittings for four locations on the left, right, front, and back, and an extension stay set that can lower the height of the bar. ●We are currently running a free gift campaign! Easy to put in and take out "Kuru Kuru Board Pad" 60cm wide x 4 pieces (length that perfectly covers the front and back bars) *Discontinued while supplies last. ●The attachment fittings can be installed almost anywhere from the top of the second row rear seat to the luggage compartment. The spacing between the front and rear bars can be changed depending on the load. ●The height of the bar is 55 mm from the bottom of the top plate when installed at the top. Furthermore, by using the 8-hole extension stay included in the kit, the lowest height can be lowered to 200 mm in 20 mm increments. ●Extension stays (8 holes, 6 holes, 4 holes) can only be specified on the official website (our own website). ●The slide bar can be easily removed by loosening the knob bolt, so there will be no problem during vehicle inspection. ●The slide bar is a safe 22mm type extra thick bar. The high-quality black paint makes it look better. For wide cars, wide car type 0302 is available. The load capacity is approximately 10kg on each side. For weights over 10kg, please add a third bar 0305. Please do not load tools or materials other than a stepladder as this may easily result in overloading. *Although this kit comes with all the necessary items to use by itself, in order to prevent accidents caused by sudden braking, etc. We recommend a band kit. Strong rubber bands can securely fix the board and bar. Band kit (for 2 short boards) Product code: 2011 Band kit (for 2 long boards) Product code: 2012 Caution (Disclaimer) > Please be sure to read We are not responsible for any accidents, damage, or injuries caused by this product. is not guaranteed at all. Please use at your own risk by thoroughly checking safety, being careful not to overload, and reinforcing if necessary. Please understand this before using the product, or if you are unable to do so, please refrain from purchasing.


Manufacturer: ‎NAMINORIKOZOU
Brand: ‎NAMINORIKOZOU
Model name: ‎0301
Packing size: ‎90.5 x 11 x 10.5 cm; 3.3 kg
Product model number: ‎0301
Discontinued by manufacturer: ‎No
Exterior condition: ‎Premium paint
Color: ‎Black
Certification: ‎1 year
Product weight: ‎3.3 Kilograms