General purpose 41Φ 41mm 41 pie machined aluminum separate handle/separate handle kit black
General purpose 41Φ 41mm 41 pie machined aluminum separate handle/separate handle kit black
Regular price
$81.00 USD
Regular price
Sale price
$81.00 USD
Unit price
/
per
Condition: New
General purpose product: 41Φ/41mm Front fork adopted vehicle [Size] Handlebar: 22.2mm/Handlebar inner diameter: Approx. 16mm/Clamp height: Approx. 35mm/Handle effective length: Approx. 240mm As this is a general purpose product, 41mm front It may not be possible to install it even if the car model uses a fork. Please be sure to check the size and make sure it will not interfere with the tank or cowl before purchasing. Depending on the vehicle model, drilling may be required to install the switch box. Also, the brake hose and accelerator wire may need to be replaced. New and unused item. There are no instructions or warranty. Reference compatible models: Hornet 250, MC31, VTR250/LD, MC33, NSR250R/SE/SP, MC18/21/28, CB400SF, vtecⅠ/Ⅱ/Ⅲ/Revo/verS, BROS400, NC25, CB-1, NC27, CB400Four , NC36, CBR400RR, NC23/29, CBX400F, VFR400R, NC30, VRX400, CBR600F, BROS 400/600, Hornet 600, PC34, BROS650, RC31, CB750, VFR750F/800, VTR1000F, SC36, VF1000F, CBR1000F , CB1100/Ⅰ /Ⅱ, SC65, Nighthawk 750, CB1100EX/Ⅰ/Ⅱ, SC65, VRX Roadster, NC33 Reference compatible models: TZR250, 3MA, FZ400, YR, FZR400R, XJR400/S/R, FZR400RR, FZR600R, FZS600/FAZER, FZR750 , 2LM, TDM850, TRX850, FZR1000, FJ1200A, FJ1200, YZF-R25/ABS, RGV250γ, VJ21A, GSX-R250R, GJ73A, Bandit 250/V, GJ77A, Goose 250, Cobra 250, Wolf 250, Bandit 400/V, GK7AA/GK75A, RF400R/V, GK78A, GSX-R400/R, GK73A, GSX400S Katana, GK77A Reference compatible models: Eliminator 250V, Ninja250/400, EX250P/EX400G, ZRX400, Zephyr 750/RS/χ, GPZ900R, GPZ1100, ZX-4, ZX400G, KR-1/S/R, Zanzas, ZR-7/7S
The sagging angle is generally about 6 degrees, and the position is not too tight. The handlebar is at the same height as the fork clamp position, so it is in a relatively racy position. Since it is machined from aluminum, it has a very good texture, and I think you will like the sharp design. The handle part is hollow, so you can attach your favorite bar end. Main models using 41mm front fork Hornet 250/600, VTR250, NSR250R, CB400Four, CBX400F, CB400SF, CBR400RR, CBR600F, CB750, VTR1000F, Nighthawk 750, VFR750/800, VF1000 F, XJR400/S/R, TRX850, FJ 1200A ,FZR600 R,FZS600 FAZER,FZR 1000, GSX-R250R,GSX400S Katana,Goose 250,RF400,Cobra 250,GSX400 Impulse,Wolf 250,Inazuma 400,GSX-R750,Bandit 250.400/V,GSX 750,GSX-R1100, GSX-R400/R, KR-1/S/R, Eliminator 250V, ZX-4, Zanzas, Zephyr χ, ZRX400, Zephyr 750/RS, GPZ1100, GPZ900R, ZR-7/ZR-7S,
Manufacturer: RISE Corporation
Brand: RISE Corporation
Packing size: 39.2 x 16.7 x 4.2 cm; 640 g
Manufacturer reference: T05Z9990053BK
>Discontinued by the manufacturer: No
Color: Black
Item weight: 640 g
The sagging angle is generally about 6 degrees, and the position is not too tight. The handlebar is at the same height as the fork clamp position, so it is in a relatively racy position. Since it is machined from aluminum, it has a very good texture, and I think you will like the sharp design. The handle part is hollow, so you can attach your favorite bar end. Main models using 41mm front fork Hornet 250/600, VTR250, NSR250R, CB400Four, CBX400F, CB400SF, CBR400RR, CBR600F, CB750, VTR1000F, Nighthawk 750, VFR750/800, VF1000 F, XJR400/S/R, TRX850, FJ 1200A ,FZR600 R,FZS600 FAZER,FZR 1000, GSX-R250R,GSX400S Katana,Goose 250,RF400,Cobra 250,GSX400 Impulse,Wolf 250,Inazuma 400,GSX-R750,Bandit 250.400/V,GSX 750,GSX-R1100, GSX-R400/R, KR-1/S/R, Eliminator 250V, ZX-4, Zanzas, Zephyr χ, ZRX400, Zephyr 750/RS, GPZ1100, GPZ900R, ZR-7/ZR-7S,
Manufacturer: RISE Corporation
Brand: RISE Corporation
Packing size: 39.2 x 16.7 x 4.2 cm; 640 g
Manufacturer reference: T05Z9990053BK
>Discontinued by the manufacturer: No
Color: Black
Item weight: 640 g