1
/
of
1
Auto Parts Tokyo
Tanabe Step Wagon RP6/8 SUSTEC Underbrace
Tanabe Step Wagon RP6/8 SUSTEC Underbrace
Regular price
$130.00 USD
Regular price
Sale price
$130.00 USD
Unit price
/
per
Shipping calculated at checkout.
Condition: New
Couldn't load pickup availability
Step Wagon RP6/8 SUSTEC Under Brace Floor Support / Member Support *Suggested retail price includes shipping. *Photos of the vehicle installed are images after installation. Grade Spada Premium Line/e: HEV Air May 2022~/May 2022~ 5BA-RP6/6AA-RP8 L15C/LFA-H4
Installation location: Front 2-point stop ◇RP6●Vehicle height data (when installed on standard car) Front 700mm Rear 705mm●Under brace ground clearance When under brace is not installed: Muffler / 152 mm When under brace is installed: Muffler / 152 mm ●Clearance data From the body Approximately 3mm to under brace ◇RP8●Vehicle height data (when standard car installed) Front 696mm Rear 707mm●Under brace ground clearance When under brace is not installed: Muffler / 148 mm When under brace is installed: Muffler / 148 mm ●Clearance data From the genuine reinforcement plate Approximately 1mm to the under brace Confirmed on vehicles registered in June 2022, 1.5L, TB, FF, CVT / Confirmed on vehicles registered in August 2022, 2.0L, NA, HV, FF, CVT *Product images are This is a representative car model, and not all car models have the same shape. Depending on the car model, there are 2 or 4 points.・Minimum ground clearance may not be secured by installing this product. Please be sure to measure and confirm the minimum ground clearance and vehicle height before installation.・Depending on the vehicle, this product itself may become the lowest part of the vehicle and the minimum ground clearance may change. Therefore, please pay attention to the installed suspension, etc. so that the minimum ground clearance of 90 mm or more is maintained as specified in the safety standards and inspection guidelines. *This applies even to vehicles with normal suspension or our suspension. The above requirements must be met during vehicle inspections and periodic inspections, but the vehicle user must also take responsibility for maintenance and management.・The road clearance will be reduced after installation, so please be careful when driving.・Each measurement value is based on our measurement conditions. Please use this as a reference as there may be differences depending on the vehicle type and vehicle condition.・Please note that the minimum ground clearance data is based on the area where the underbrace is installed and is not measured for the entire vehicle.・Please note that installing this product may make it difficult to replace engine oil, transmission oil, etc.
Manufacturer: Tanabe
Brand: Tanabe
Model name: Under brace
Packing size: 120 x 15 x 15 cm; 2 kg
Item model number: UBH49
Certification: Subject to manufacturer's warranty
Item weight: 2 Kilograms
Installation location: Front 2-point stop ◇RP6●Vehicle height data (when installed on standard car) Front 700mm Rear 705mm●Under brace ground clearance When under brace is not installed: Muffler / 152 mm When under brace is installed: Muffler / 152 mm ●Clearance data From the body Approximately 3mm to under brace ◇RP8●Vehicle height data (when standard car installed) Front 696mm Rear 707mm●Under brace ground clearance When under brace is not installed: Muffler / 148 mm When under brace is installed: Muffler / 148 mm ●Clearance data From the genuine reinforcement plate Approximately 1mm to the under brace Confirmed on vehicles registered in June 2022, 1.5L, TB, FF, CVT / Confirmed on vehicles registered in August 2022, 2.0L, NA, HV, FF, CVT *Product images are This is a representative car model, and not all car models have the same shape. Depending on the car model, there are 2 or 4 points.・Minimum ground clearance may not be secured by installing this product. Please be sure to measure and confirm the minimum ground clearance and vehicle height before installation.・Depending on the vehicle, this product itself may become the lowest part of the vehicle and the minimum ground clearance may change. Therefore, please pay attention to the installed suspension, etc. so that the minimum ground clearance of 90 mm or more is maintained as specified in the safety standards and inspection guidelines. *This applies even to vehicles with normal suspension or our suspension. The above requirements must be met during vehicle inspections and periodic inspections, but the vehicle user must also take responsibility for maintenance and management.・The road clearance will be reduced after installation, so please be careful when driving.・Each measurement value is based on our measurement conditions. Please use this as a reference as there may be differences depending on the vehicle type and vehicle condition.・Please note that the minimum ground clearance data is based on the area where the underbrace is installed and is not measured for the entire vehicle.・Please note that installing this product may make it difficult to replace engine oil, transmission oil, etc.
Manufacturer: Tanabe
Brand: Tanabe
Model name: Under brace
Packing size: 120 x 15 x 15 cm; 2 kg
Item model number: UBH49
Certification: Subject to manufacturer's warranty
Item weight: 2 Kilograms
Share
