HVAC fan cage blower motor-19153679 15-81104 700076 52498954 Replacement 1988-1996 Buick Regal/1993-2005 Chevrolet | 1990-2001 Chevrolet | 1988-2002 Pontiac

【Replacement AC Blower Motor with Fan】: Responsible for producing air through the vents of your car's AC and heating system. If your AC or heater isn't producing or circulating heated or cooled air, there may be a problem with your blower motor. [Replacement Part Number]: 19153679, 15-81104, 700076, 52498954. [Fitment]: 1988-1996 Buick Regal | 1993-2002 Chevrolet Camaro | 1995-2005 Chevrolet Cavalier | 1990-2001 Chevrolet Lumina | 1995-1999 Chevrolet Monte Carlo | 1988-1997 Oldsmobile Cutlass Supreme | 1993-2002 Pontiac Fire [Motor of Advantages】: Quiet, energy efficient, durable, wind power, no noise. Permanently lubricated, self-aligning bearings with long design life and reliable performance. 【1 Year Warranty】: All blower motor resistors must be inspected and tested before shipping.

If you turn up the AC/heat in your truck and the amount of air coming out of the vents remains the same, you may need to replace the blower motor. Blower motors are designed to produce more air when you turn a knob on your AC system. But when the blower motor fails, the motor can no longer blow high. Replacing the faulty factory blower motor on your truck will allow you to control the AC/heat again. OE Part Number: 19153679 15-81104 700076. 52498954 Heater Blower Motor Fits: 1988-1996 Buick Regal 1993-2002 Chevrolet Camaro Chevrolet Cavalier 1995-2005 Models. 1990-2001 Chevrolet Lumina. Chevrolet Monte Carlo 1995-1999 1988-1997 Oldsmobile Cutlass Supreme 1993-2002 Pontiac Firebird 1988-1996 Pontiac Grand Prix 1995-2002 Pontiac Sunfire How to replace. 1) Locate the blower motor under the dashboard on the passenger side. Access to the blower motor on some vehicles requires removing the dashboard. Disconnect the blower motor electrical connector. (Note: On older vehicles, the blower motor is located in the engine compartment on the passenger side firewall). 2) Remove the blower motor assembly retaining screw. 3) Remove the blower motor fixing screw. Remove the motor from the box. 4) Compare the new blower motor to the old blower motor to ensure you have the correct part. Install the new motor into the box and tighten the fixing screws. Reinstall the blower motor assembly. 5) Connect the blower motor electrical connector.


Manufacturer: ‎Jackma555
Brand: ‎Jackma555
Packing size: ‎20.4 x 20.4 x 20.2 cm; 1.8 kg
Product model number: ‎KBM0073
By manufacturer Discontinued: ‎No
Product weight: ‎1.8 Kilograms