Takagi EARTH MAN Heat Gun with Temperature Adjustment Function Small HG-1450B

[Using hot air for a wide range of applications such as shrink packaging, drying paint, and bending] For processing heat shrink tubes, bending plates and PVC pipes, shrinking shrink films, drying thermosetting paints and putty, For removing paint, adhesives, stickers, stickers, carpets, and scraping out deep places [Suitable for a wide range of applications with a wide range of nozzle attachments, comes with a storage case for easy carrying] Set contents: Main unit (HG-1450B) x 1 , Wide nozzle x 1, Spot nozzle x 1, Hook nozzle x 1, Spatula type nozzle x 1, Scraper x 1, Scraper fixture x 1, Storage case x 1, Instruction manual x 1 [With digital display, 3 levels] With air volume adjustment function, temperature and air volume can be adjusted from approximately 70 to 550 degrees Celsius] Voltage: AC100V, Frequency: 50/60Hz, Current: (Blower) 0.5A (weak/strong wind) 14.6W, Rated power consumption: (Blower) 45W･(Hot air) 1450W, Hot air temperature:(Blowing) Approx. 50℃･(Hot air) Approx. 70-550℃, Discharge flow rate:(Blowing) Approx. 350-650L/min, Air flow rate switching: (3 levels) Blowing I/Weak Wind II/Strong Wind III, Body size (body only): Approx. length 265 x Width 90 x Height 215 mm, Cord length: Approx. 2.0 m, Mass (Main unit only): Approx. 0.74 kg, Rated time: 20 minutes, Temperature display Method: Digital display *Since it is controlled by a heater, the hot air temperature will fluctuate depending on conditions such as air volume and temperature. Country of manufacture: China

With digital display and 3-stage air volume adjustment function Temperature and air volume can be adjusted from approximately 70 to 550 degrees Celsius (air blow) approximately 50 degrees Celsius/(weak/hot air) approximately 70 to 550 degrees Celsius *Since it is controlled by a heater, the air volume and temperature can be adjusted. The hot air temperature fluctuates depending on the following conditions. Uses hot air for a wide range of applications such as shrink-wrapping, drying paint, bending, etc. Comes with a storage case that is convenient to carry A variety of nozzle attachments are available for a wide range of applications Hook nozzle.Spot nozzle for processing heat-shrinkable tubes. ･Wide nozzle for bending board materials and PVC pipes. Spatula-shaped nozzle for shrinking shrink film and drying thermosetting paints and putty.Scraper for removing paint and adhesives.Seals and carpets For peeling and scraping out deep places *This product is for home use. Please do not use it for commercial purposes.


Brand: Takagi
Product model number: HG-1450B
Product size: 26.5 x 9 x 21.5 cm; 740 g
Color: Blue
Name on nameplate: ‎Heat gun with temperature control function
Power supply: ‎Power cord included
Voltage: ‎100 Volts
Wattage: ‎1450 W
Quantity: ‎1
Accessories: None Warranty: 6 months from the date of purchase *Based on the warranty.
Product weight: 740 g