PAPAGO! Official Domestic Product PAPAGO! Exclusive Smart Constant Direct Power Cord with Switch A-JP-RVC-3A

Equipped with an on/off switch The power supply can be turned on and off while the vehicle is parked.Since it is equipped with a power on/off switch, the power can be turned off when monitoring is not required (when constantly connected). Automatic shut-off function It also prevents the battery from dying by providing a function that detects changes in voltage and cuts off the power supply from the converter to the drive recorder (*1). In the unlikely event that the voltage of the car's constant power supply drops, the automatic voltage cutoff function is designed to leave enough voltage to start the car's engine (*1*2). For 12V cars, it starts when the power supply voltage is constantly below approximately 11.8V (error ±01.V). For 24V vehicles, it starts when the constant power supply voltage drops below approximately 23.8V (error ±01.V). *1 Please note that we cannot guarantee that this product will work properly or operate properly depending on the vehicle model, vehicle interior equipment, constant power supply device, vehicle battery usage period (lifespan), etc. After the automatic shutoff function is activated, standby power will continue to flow from the connected device to the converter, so it will not completely shut off. *2 This is an experience value set independently by our company. It may not be applicable to all car models or battery manufacturers, so please be sure to check the specifications of the car and battery manufacturer you are installing. In addition, product specifications may change without notice due to improvements. Compatible models: PAPAGO! GoSafe series drive recorder products GoSafe M790S, GoSafe S70GS1, GoSafe S36GS1, GoSafe S36G, GoSafe 34G, GoSafe D11, GoSafe D11GPS, GoSafe 130V2, GoSafe 268

This product is a wiring cable that enables a constant power supply to the drive recorder by connecting it to the vehicle battery's constant power supply/fuse box. It can provide constant power/fuse box (when connected to BAT) even after the car engine is turned off, and is compatible with products that have crime prevention detection functions. Precautions for use 1) Required! Before installation Before installation, be sure to check the operation of this product and the PAPAGO! drive recorder body. After confirming the operation, please install this product. *For information on how to install the drive recorder, please check the instruction manual of each product. 2) Please do not use it for anything other than drive recorder purposes. 3) Please note that the use of this product is at the customer's own discretion and responsibility. Also, please consult with a specialist or dealer who has experience and knowledge in installing car electronics products before installing. 4) If the drive recorder does not work properly after installing this product, please check the following items. Examples: The power does not turn on / the power goes out / the power restarts, etc. 1. The cord of this product or the connector of the drive recorder has fallen off or become loose. 2 Isolate the cause of the problem Isolate the cause: ``Is it the drive recorder itself?'' ``Is it the power connection side?'' Please connect directly to the standard cigarette lighter socket of your car using the cigarette plug power cable that comes with the drive recorder. If no symptoms occur, it is not a malfunction on the main unit side. Check and adjust the wiring and wiring connections. 3 ``Starting the main unit without a memory card'', ``Formatting the memory card'', ``Testing operation with another memory card'', ``Insufficient voltage for the required voltage (octopus wiring on the back of the audio system, USB car charger, etc.) Please also check the options such as "Do not use the drive recorder" and "Initialize the drive recorder settings". 5) The motion detection function detects and records changes in the video being shot. Please refrain from using it in areas where there are many cars or people passing by, or where there are moving objects such as illuminated signboards or lights. *Please note that since you will be constantly recording, the power consumption will be high and the battery will quickly run out. 6) This product is designed for environments where cars are used almost every day. If this product will not be used for more than 3 days, please turn off the power of the drive recorder or disconnect the power connector from the drive recorder. Please note that the car battery will run out of power after about 5 days (theoretical value) in standby mode without photographing any moving objects. *Depending on the performance, lifespan, environment, etc. of the car battery, the car battery may reach its limit quickly. 7) Please note that we cannot guarantee that ``this product'' will be able to respond or operate correctly depending on the car model, car interior equipment, constant power supply device, car battery usage period (lifespan), etc. 8) For some car models that have special functions such as idling stop, hybrid, and energy saving, the power is cut off in conjunction with each function, or when power is taken from a line that changes rapidly, it naturally stops in conjunction with the function, so it is special. Obtain power with one product for each power line that does not work with the function. 9) "Moving object detection function" and "time lapse" are designed as security monitoring functions when the car is stopped. When this function is activated, the monitor screen will be hidden (nothing will be displayed on the monitor), leading to the misunderstanding that the main unit is powered off or not operating, so be sure to use it while recording normally or while driving. Do not turn on "Motion Detection" or "Time Lapse". 10) We are not responsible for any damage caused by disassembly or modification by the customer. 11) Incorrect voltage conversion or wiring may lead to product failure, electric shock, car engine failure, natural disaster, fire, or other accidents or serious accidents. Please be sure to consult with a specialist before performing this work. Furthermore, please note that our company is not responsible for any damage or damage caused by the customer's intentional or negligent actions, product modification, etc., or damage or damage caused to third parties. 12) If you notice any problems or abnormalities while using this product, immediately stop using it and have it inspected. 13) Make sure the car engine stops.


Manufacturer: Papago
Brand: Papago
Model name: A-JP-RVC-3A
Product size: 400 x 5.5 x 1.5 cm; 100 g
Product model number: ‎A-JP-RVC-3A
Original product number: ‎A-JP-RVC-3A
Product dimensions: Depth x Width x Height: 4 x 0.06 x 0.02 m
br>Resolution: 1
Installation size: Approx. 4m
Color: Black
Certification: 1 year
Product weight: 100 g